554884
5
Zoom out
Zoom in
Previous page
1/11
Next page
JA-60GSM dialer module 5 / 11 MFJ51215
4.2 SMS text editing
The list of SMS texts stored in the dialer consists of texts reported as
event reports (installation name, event name and source name) and
texts for remote control instructions. All these texts can be changed by
the following SMS form:
yyyyyTXTy,text, y,text,…..
where
yyyyy is the remote access code; default setting is 0000 (4
zeros); the code can be changed, see 5.4
TXT is the text programming command
y is the text index (from 1 to 711, see table 4.2.1).
, comma (separator)
text is the new customized text string. Neither a comma nor a
period (full stop) can be used inside the text. A space
inside the text is a valid character (the dialer ignores
spaces outside the “text” string)
Note: a single TXT command SMS can change more than one text
(limited by the maximum SMS size of the SMS in of the GSM network).
Example: If the factory default code in the dialer is 0000 (four zeros),
then sending SMS:
0000
TXT
201, uncle Sam’s controller, 202, aunt Mary’s controller
to the dialer will change the names of remote controller numbers 1 and
2.
4.2.1 Table – complete list of SMS texts
Text index y Factory default text Text index y Factory default text
1 Intruder alarm – instant zone 403 Wireless detector #3
2 Intruder alarm – delayed zone 404 Wireless detector #4
3 Fire alarm 405 Wireless detector #5
4 Panic alarm 406 Wireless detector #6
5 Wrong access code alarm 407 Wireless detector #7
6 Alarm after power on 408 Wireless detector #8
7 Tamper alarm 409 Wireless detector #9
8 Tamper OK 410 Wireless detector #10
9 Alarm end 411 Wireless detector #11
10 Alarm canceled by a user 412 Wireless detector #12
11 Arming 413 Wireless detector #13
12 Disarming 414 Wireless detector #14
13 Partial arming (Home) 415 Wireless detector #15
14 No code arming 416 Wireless detector #16
15 External communication failure 501 User code #1
16 External communication recovery 502 User code #2
17 Failure 503 User code #3
18 Failure recovery 504 User code #4
19 AC failure longer than 30 minutes 505 User code #5
20 AC failure 506 User code #6
21 AC recovery 507 User code #7
22 Battery failure 508 User code #8
23 Battery recovery 509 User code #9
24 Enter programming mode 510 User code #10
25 Exit programming mode 511 User code #11
26 Remote access 512 User code #12
27 Remote access – end 513 User code #13
28 RF jamming 514 User code #14
29 Internal communication failure 600 Control panel status:
30 Internal communication recovery 601 Armed
31 Periodic test 602 Disarmed
101 Control panel 603 Exit delay
102 Subsystem 604 Entrance delay
103 Wireless siren 605 Alarm
104 GSM dialer 606 Programming mode
105 Digital line 607 User mode
110 Master code 608 Partially armed
201 Controller #1 609 Battery failure
202 Controller #2 610 Tamper alarm
203 Controller #3 611 Alarm memory
204 Controller #4 612 System failure
205 Controller #5 613 Power supply failure
206 Controller #6 614 Control panel status unknown
207 Controller #7 621 Time:
208 Controller #8 622 Last event:
301 Wired detector #1 623 SMS processing failure.
302 Wired detector #2 624 Credit unknown
303 Wired detector #3 625 Text will be inserted by instruction CREDIT (see 5.14)
304 Wired detector #4 650 SMS processed successfully.
305 Wired detector #5 651 Wrong SMS processing.
306 Wired detector #6 653 AUX switched ON
307 Wired detector #7 654 AUX switched OFF
308 Wired detector #8 700 Alarm system reports:
309 Wired detector #9 703 AM
310 Wired detector #10 704 DM
311 Wired detector #11 705 MO
312 Wired detector #12 706 ME
313 Wired detector #13 707 AUXON
314 Wired detector #14 708 AUXOFF
315 Wired detector #15 709 CREDIT
316 Wired detector #16 710 PGON
401 Wireless detector #1 711 PGOFF
402 Wireless detector #2
5


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-ja-60gsm

Reset search

  • Suddenly the system stopped and no communication with the main door panel Submitted on 24-9-2021 at 12:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60GSM in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60GSM

Jablotron JA-60GSM User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info