554884
11
Zoom out
Zoom in
Previous page
1/11
Next page
JA-60GSM dialer module 11 / 11 MFJ51215
11 Brief list of programming sequences
Function Sequence Options Factory default
Tel. numbers for SMS and audible
reports
7t xxx..x F0
t = memory from 1 to 8
xxxx = tel. number (max.20 digits), F9=”+”
blank
Event SMS reports 81 uu t y
Event acoustic reports 82 uu t y
uu = events index from 01 to 31
t = memory from 1 to 8
y=0 disabled, y=1 enabled
t=1&2 alarm SMS
t=3&4 alarm SMS + audible
t=5&6 alarm+arming SMS + audible
t=7&8 audible alarm only
SMS and audible reports SW 80 y
y=0 disabled, y=1 enabled, y=2 (enabled with
restrictions)
enabled
GSM signal checking 91 y y=0 disabled, y=1 enabled disabled
Incoming call reaction 93 x
x = 0 no reaction
x = 1 to 8 answer after 5 to 40 seconds
x = 9 answer after the 1
st
ring of the 2
nd
call
after 25 seconds
Service remote access code 94 xxxxxxxx F0
xxxxxxxxx = code, it can have form 1 to 8 digits
deleting - 94F0 - remote access is not possible
0000
User remote access code 94 xxxxxxxx F1
xxxxxxxxx = code, it can have from 1 to 8 digits
deleting 94F1 - remote access is not possible
1111
Confirmation SMS reply 95 y
y=0 disabled, y=1 enabled
if disabled, end instruction with C to get the reply
enabled
Reset 96060 Reset to factory default settings
Reset & no reports 96061 Reset to factory default settings & all reports disabled
Immediate codeless dialing-in 970 If entered while in programming, you can dial-in after the 1
st
ring without the access code
Measuring of GSM signal 971 If entered while in programming, it shows GSM signal strength (from 0 to 9)
Volume adjustment of the
connected phone
974x
975x
Level adjustment of received and outgoing signal
(from 1 to 9)
5 – medium level
GSM Module Reset 976
If entered while in programming mode, the GSM module will be disconnected from and
connected to the GSM network.
It is also possible to send the command via SMS in the
form yyyyy*GSM.
Language setting 977 xx
xx=01 to 16 where: 01=EN, 02=CZ, 03=SK, 04=DA,
05=FI, 06=DE, 07=HU, 08=IT, 09=PL, 10=PT,
11=RU, 12=SE, 13=TR, 14=ES, 15=NL, 16=CN
English
Attached phone function 98 y
y=0 telephone line y=2 no function
y=1 alarm keypad y=3 emergency call
telephone line
Emergency call number 99 xxxxxx F0 xxxxxx = tel. number (max.20 digits), F9=”+” erased
CMS telephone numbers 0y p xxxxx F0
y=1 primary number, y=2 back up number
p=1 CMS1, p=2 CMS2
xxxx = tel. number (max.20 digits), F9=”+”
all erased
Account ID 03 p zzzz F0
p=1 CMS1, p=2 CMS2
zzzz account ID, z=0 to 9 or A=F1, B=F2, C=F3,
D=F4, E=F5 and F=F6
0000 for both CMSs
CMS protocol 04 p x
p=1 CMS1, p=2 CMS2
x=0 CID, x=1 SMS, x=2 GPRS
CID for both CMSs
Events to report 05 p uu y
p=1 CMS1, p=2 CMS2
uu = events index from 01 to 31
y=0 disabled, y=1 enabled
all reports disabled
CMS redialing pause 06 p t
p=1 CMS1, p=2 CMS2
t=1 to 9 (x 5minutes)
5 minutes
Periodic test interval 07 p hh mm
p=1 CMS1, p=2 CMS2
hh mm hours minutes
24hr. after the last report
CMS reports SW 00 p y
p=1 CMS1, p=2 CMS2
y=0 disabled, y=1 enabled
disabled for both CMSs
CMS2 as a backup of CMS1 08 y
y=0 two independent CMS
y=1 CMS2 is a back up for CMS1
two independent CMS
Storing the event “data to CMS
sent” into the event list
09 y y=0 ... disable , y=1 ... enable Enable
11


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-ja-60gsm

Reset search

  • Suddenly the system stopped and no communication with the main door panel Submitted on 24-9-2021 at 12:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60GSM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60GSM in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60GSM

Jablotron JA-60GSM User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info