478469
50
Zoom out
Zoom in
Previous page
1/116
Next page
48 FTM-10R OPERATING MANUAL
CLONING THE MESSAGE
It is possible to copy/duplicate the programmed messages, and all the IDs of the members,
when using the “Message” function.
If messages (max 20 messages) and IDs (max 20 persons) are programmed in only one
transceiver (FTM-10R), the information can be copied to the transceivers of all members at
once, without connecting any cables.
Note: This message clone function will only operate using the Club Channel frequency in
the 440 MHz amateur band.
Recall and monitor the Club Channel frequency. If the channel is busy and any signal
is heard, the message clone function cannot work correctly. Change the Club Chan-
nel to a frequency not in use, and clone the messages and the IDs.
Preparations (Source Transceiver)
1. Turn the transceiver off.
2. Press and hold the PTT key while turning the power on
again.
3. The “TX CLONE” notation and the Club Channel frequency
appear on the display alternately.
Preparations (Destination Transceiver)
1. Turn the transceiver off.
2. Press and hold the
[
VOL/SEL
]
key while turning the power
on again.
3. Rotate the DIAL knob to select the “SF2 COPY MSG”.
Cloning
1. Bring the Source Transceiver and the Destination Transceiver as close as possible.
2. Press the top panel key on the Source Transceiver.
The Destination Transceiver does not require any set up operation.
When receiving clone data from the “Source Transceiver”, the “Destination Transceiver”
automatically stores all the data. The LED blinks for 3 seconds with a blue color, then
displays “MSG” and “RECEIVED” on the LCD. The “Destination Transceiver” auto-
matically turns off and on, then returns to normal operation and mode set before the
Clone operation began. The copy/clone procedure is completed.
After completion of the copy/cloning, set your “MY ID” (see page 49). By setting the “MY
ID”, your ID will be displayed with the messages you send.
If “ERROR” is displayed on the LCD screen during the Clone procedure, the cloning has
not completed correctly. In this case, first turn the radio off and back on, then try the cloning
procedure again. In this case, please be aware of the following advice.
P The distance between the source transceiver and destination transceiver must be close.
P Signals on the Club Channel frequency may interrupt the data transfer.
P Any equipment that generates electrical noise may interrupt the data transfer.
MESSAGE FEATURE
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info