478469
52
Zoom out
Zoom in
Previous page
1/116
Next page
50 FTM-10R OPERATING MANUAL
MESSAGE FEATURE
When the Club Channel monitor feature is activated, steps 1 and 2 above are not necessary.
3. Press the top panel or key to select the message you wish to send.
4. Press the top panel key to transmit the selected message on the Club channel fre-
quency.
The “TXM” notation will appear on the display, and the
message will be transmitted. It takes approximately 8 sec-
onds to transmit the message.
When the message transmission is completed, the TX/BUSY
indicator glows white for one second.
Receiving a Message
1. To receive a message, press the front panel or key to recall the Club channel or
activate the Club Channel monitor feature (see page 44).
2. When you receive a message: a beep sounds, the TX/BUSY indicator blinks blue, and
[
“Message” from “sending station’s ID”
]
scrolls on the display.
Press the , , or key to clear the received message, and wait for a new mes-
sage.
CLONING
You can transfer messages or all data stored in one FTM-10R to another FTM-10R by
utilizing the handy “Cloning” feature. The FTM-10Rs Clone feature uses the radio link.
No hardwire connection is needed.
Note: The clone function is realized only by using the Club Channel frequency of 440 MHz
amateur band. Recall and monitor the frequency of the Club Channel. If the channel
is busy (some person is using the frequency and any signal is heard), the message
clone function will not work correctly. In this case, change the Club Channel fre-
quency. See page 52 for details.
Preparations (Source Transceiver)
1. Turn the transceiver off.
2. Press and hold the PTT key while turning the power on
again.
The “TX CLONE” notation and the Club Channel frequency
appear on the display alternately.
Preparations (Destination Transceiver)
1. Turn the transceiver off.
2. Press and hold the
[
VOL/SEL
]
key while turning the power
on again.
3. Rotate the DIAL knob to select the “SF1 COPY ALL”.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info