478469
54
Zoom out
Zoom in
Previous page
1/116
Next page
52 FTM-10R OPERATING MANUAL
CHANGING THE CLUB CHANNEL FREQUENCY
By factory default, the 439.900 MHz (EXP Version:433.500 MHz) frequency is stored in
the Club Channel. If you wish to change the Club Channel, perform the following steps.
ADVICE: For the “Club Channel”, any frequency in the 144 MHz or 440 MHz amateur
bands can be programmed. However, the Message Clone function and the Clone
function can work only on the 440 MHz band. When these functions are used,
select the 440 MHz band.
1. Press the front panel / key to recall the Group
Memory Bank (“GRP” notation appears at the upper left
corner in the display for a moment).
When the display indicates the Clock, Stop Watch Timer,
or Temperature, press the
[
VOL/SEL
]
key to change the VFO or memory mode, then
perform the above selection.
2. Rotate the DIAL knob to select the Club Channel (The “CLB
notation appears at the upper left corner in the display for
two seconds, then changes to the “GRP” notation).
3. Press and hold the key for one second to enter the Club
Channel Customization mode.
4. Rotate the DIAL knob to select Menu Item “C1 CLUB FRQ”.
5. Press the key momentarily, to display the current memo-
rized frequency of the Club Channel and the “SET” nota-
tion will be blinking.
6. Press and hold the key for one second to enable the changing of the Club Channel
frequency.
The blinking “SET” notation changes to the blinking “CLB” notation.
7. Rotate the DIAL knob to select the desired Club Channel frequency.
You may change the operating band (430 MHz to 144 MHz, or vice versa) by pressing
the front panel / keys.
8. Press and hold the key for one second to save the new Club Channel frequency.
The blinking “CLB” notation returns to the blinking “SET” notation.
9. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
MESSAGE FEATURE
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info