478469
51
Zoom out
Zoom in
Previous page
1/116
Next page
49FTM-10R OPERATING MANUAL
SET YOUR PERSONAL ID
To choose your personal ID from the member list.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
[
VOL/SEL
]
key to change to the VFO or memory mode, then perform the above step.
2. Rotate the DIAL knob to select Menu Item “F17 ID REG”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the member box (1 ~ 20)
where your ID is stored.
5. Press the
[
VOL/SEL
]
key to save the new setting and exit
to normal operation.
SENDING MESSAGES
The registered message can be sent to the members who are receiving the Club Channel.
When a message is sent, the transmitters ID will be sent also, and the receiver can identify
who sent the message.
Note: This “Message” function is only available on the Club Channel.
The “MY ID” setting (see above) is required for the transmitters ID to be shown with
the received message.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
[
VOL/SEL
]
key to change to the VFO or memory mode, then perform above step.
2. Rotate the DIAL knob to select Menu Item “F14 FKEY
MOD”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to set this Menu Item to “FNC+MSG
or “MSG” (this will enable the selection of the transmit mes-
sage with the top panel keys).
5. Press the
[
VOL/SEL
]
key to save the new setting and exit
to normal operation.
To send a message:
1. Press the front panel / to recall the Group Memory
Bank (the “GRP” notation will appear at the upper left cor-
ner in the display for a moment).
2. Rotate the DIAL knob to select the Club Channel (The “CLB
notation will appear at the upper left corner in the display
for a moment).
MESSAGE FEATURE
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info