478469
49
Zoom out
Zoom in
Previous page
1/116
Next page
47FTM-10R OPERATING MANUAL
MESSAGE FEATURE
PROGRAMMING A MEMBER LIST
(Requires all members set the same member list (includes own ID) into the same member
box in the same order.)
It is possible to register a maximum of 20 persons, in order to identify the sender. When
you receive a message transfer, you can know who sent the message by the ID in the regis-
ter. In addition, your ID can be sent to the members when you transmit any messages to
them.
If all the members share the register information (ID), the message sender ID will be shown
on the display when receiving the message.
Even if no IDs are registered, the function can work. In this case “MEMBER 1” though
“MEMBER 20” will be displayed, when receiving a message.
We recommend that you use your call sign for the member list.
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
When the display indicates the Clock, Stop Watch Timer, or Temperature, press the
[
VOL/SEL
]
key to change to the VFO or memory mode, then perform the above step.
2. Rotate the DIAL knob to select Menu Item “F16 ID LIST”.
3. Press the key to enable selection of this Menu Item.
4. Rotate the DIAL knob to select the desired member box (1
~ 20) into which you wish to store a member ID. The LCD
will display the previously stored member ID.
5. Press and hold the key for one second.
Press the PTT key to clear the previously stored member
ID, if desired.
6. Rotate the DIAL knob to select the first character of the
personal ID you wish to store, and then press the key
briefly to save the first character of the personal ID and
move on to the next place.
7. Repeat previous step to complete the personal ID (up to 8
characters). If you make a mistake, press the key to
move back to the incorrect character, then re-enter the cor-
rect character.
Press the PTT key to delete all data after the cursor that may have been previously
stored erroneously.
8. When the personal ID entry is complete, press and hold in the key for one second.
If you decide to cancel programming a member ID, press the
[
VOL/SEL
]
key, exit to
normal operation.
9. If you wish to store another personal ID, repeat steps 4 through 8 above.
10. Press the
[
VOL/SEL
]
key to save the new setting and exit to normal operation.
Number of Member box
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info