Menu layout
Corded phone
PHONEBOOK VIEW
ADD
EDIT
DELETE
DELETE ALL
PB STATUS
CALL LOG MISSED
RECEIVED
DIALED
DATE & TIME TIME FORMAT
SET CLOCK
LANGUAGE
SETTINGS RING SETUP EXT. RING MELODY
VOLUME
INT. RING MELODY
VOLUME
DELETE HS
DIAL MODE TONE/PULSE
FLASH TIME SHORT/MEDIUM/LONG
KEY TONE
CHANGE PIN
BS DEFAULT
PAGE ALL HS
REGISTRATION
ANS. MACHINE MSG PLAYBACK
DELETE ALL
MEMO
TAM ON/OFF
TAM SETTINGS ANSWER MODE ANS & REC.
ANSWER ONLY
OGM SETTINGS ANS & REC.
ANSWER ONLY
ANSWER DELAY 2/4/6/8 RINGS
TAM LANGUAGE DEUTSCH
FRANÇAIS
ENGLISH
BS SCREENING
REMOTE ACC.
COMPRESSION LOW/MEDIUM/
HIGH
CHANGE PIN
TAM DEFAULT
Handset
Call log Details
Delete
Delete all
Call
Store number
Call log type
Sound Ringer External Melody ...
Internal Melody ...
Ringer volume Level ...
Silent Beep/Off
Tones Key beep
Confirmation
Battery low
No coverage
Settings Handset settings Select base
Display Contrast
Handset name
Language
Auto answer
Register handset
Deregister
Handset reset
Base settings Ringer Ringtone
Ringer volume
Dial mode Tone/Pulse
Flash time 100/300/600 ms
System PIN
Base reset
Date/Time/Alarm Date/Time Time format
Date format
Enter time
Enter date
Alarm Alarm On/Off
Enter time
Ringtone
Memory keys M1/M2/M3/M4
Answer machine Play messages
Delete messages
Answer On/Off
Record MEMO
Outgoing message Record message Answer/Record
Answer only
Play message Answer/Record
Answer only
Answer settings Answer mode Answer/Record
Answer only
TAM language Deutsch/English/Française
Answer delay 2/4/6/8 rings
Recording time 30/60/120 s / Unlimited
Call screening
Remote access Enable/Disable
Making and receiving calls
Making a call, answering a call, ending a call
To make a call on the corded phone
Enter the telephone number and lift the receiver or press .
- or -
Lift the receiver or press . When you hear a dial tone, enter the tele-
phone number.
To answer a call on the corded phone
Lift the receiver, or press .
To end a call on the corded phone
hen you are using the receiver, place it on the telephone base.
When you are using the speakerphone, press .
To make a call on a cordless handset
Enter the telephone number and press .
- or -
Press . When you hear a dial tone, enter the telephone number.
To answer a call on a cordless handset
Press .
To end a call on a cordless handset
Press or place the handset in the charger.
Handsfree
Whilst in a call press on the corded phone or once again on the
cordless handset. To deactivate, press the same key again.
Volume control
On the corded phone
Whilst in a call press the volume keys L and M.
On a cordless handset
Whilst in a call press the volume buttons on the side.
Mute
On the corded phone
Whilst in a call press . Press again to resume the conver-
sation.
On a cordless handset
Whilst in a call press . Press again to resume the conversation.
Redial
On the corded phone
1. Press M in idle state.
- or -
press the menu key , select CALL LOG -> DIALED and press .
2. Select the desired entry with L and M.
3. Lift the receiver or press to dial the telephone number.
On a cordless handset
1. Press in idle state.
2. Select the desired entry with and .
3. Press to dial the telephone number.
Notes on settings
Some settings are secured with a PIN. In delivery state this PIN is “0000“ for
both corded phone and handset.
Notes on the answering machine
Your D200 has a built-in digital answering machine. The total capacity is about
15 minutes. You can operate the answering machine at the corded phone or
from each registered handset. With a touch-tone telephone, you also have a
PIN-protected remote access to the answering machine.
Two operating modes are available:
- announcement with message record
- announcement only.
In delivery state, a standard announcement is already stored for each operating
mode (German, English and French). This makes the answering machine im-
mediately ready for operation. When reaching the maximum recording capacity
in "announcement with message recording" mode, the unit automatically
switches to the "announcement only" mode.
Remote access is only possible if this function is activated.
To get access to your answering machine remotely from any touch-tone tele-
phone you have to enter the four-digit remote access code.
To access your answering machine from a remote touch-tone phone, you must
enter the remote access PIN.
Using remote access
1. Dial your telephone number.
2. When switched off, the answering machine takes the call after approx. 16
ring signals in "Answer only" mode.
Press the star key during the announcement to initiate the remote access
and enter the four-digit remote access PIN of your telephone. You then have
the following options.
- or -
When switched on, the answering machine takes the call after the set
numbers of rings.
Press the star key during the announcement to initiate the remote access
and enter the four-digit remote access PIN of your telephone. You then have
the following options:
- key 5 - start playback
- key 7 - turn on the answering machine
- key 9 - turn off the answering machine
While a message is playing:
- key 2 - delete current message
- key 4 - repeat current message. Press key 4 twice to skip back to the
previous message.
- key 6 - skip to the next message
- key 8 - stop the current message playback.
Note: The connection will be cut off after three incorrect PIN entries.
Help and support
Some issues may be resolved by simply disconnecting the power to the unit.
Switch off the power to the base station and remove the batteries in the handset
for about 20 minutes.
Reconnect everything to determine if the issue has been resolved.
Safety information
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the fol-
lowing:
• Read and understand all the instructions.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
• Do not use this product near water (for example, near a bath tub, kitchen sink,
swimming pool).
• Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
• Unplug this product from the wall outlet and refer servicing to your supplier
under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating in-
structions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
• Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
• Do not use the telephone to report a gas leak in the vicinity of the leak.
• For pluggable equipment, the socket-outlet (power adaptor) shall be installed
near the equipment and shall be easily accessible.
Rechargable batteries
• Use only the supplied NiMH (Nickel Metal Hydride) batteries!
The operation periods for the handsets are only applicable with the default
battery capacities
• The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or unit damages. The
manufacturer will not be held liable for damage arising from such non-com-
pliance.
• Do not use third party charging bays. The batteries may be damaged.
• Please note the correct polarity while inserting the batteries.
• Do not immerse batteries in water, do not place in fire.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instruction. Must be disposed of at
the point of sale or at the appropriate collection points provided by the public
waste authorities.
Caution, risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Intended use
This phone is suitable for use on either a public telephone network or on an ap-
proved Private exchange (PABX). Any other use is considered unintended use.
Unauthorised modifications are prohibited. Do not attempt to carry out repairs
yourself.
Disposal
In order to dispose of your device, take it to a collection point pro-
vided by your local public waste authorities (e.g. recycling centre).
According to laws on the disposal of electronic and electrical de-
vices, owners are obliged to dispose of old electronic and electrical
devices in a separate waste container. The symbol indicates that the
device must not be disposed of in normal domestic waste!
Batteries represent a hazard to health and the environment!
Never open, damage or swallow batteries or allow them to pollute
the environment. They may contain toxic, ecologically hazardous
heavy metals. You are legally required to dispose of batteries and
rechargeable batteries safely, either at a retailer that sells bat-
teries or at an appropriate collection point that provides a suitable
container. Never put batteries in the household waste. Disposal is
free of charge. Lithium batteries and battery packs of all kinds
should be fully discharged before you drop them off. Be sure to
take precautions against short-circuits, e.g. by covering poles with
adhesive tape, to prevent the risk of a fire.
Packaging materials must be disposed of according to local regu-
lations.
Guarantee
SWITEL equipment is produced and tested according to the latest production
methods. The use of carefully chosen materials and highly developed tech-
nologies ensures trouble free functioning and a long service life. The terms of the
warranty do not apply where the cause of the equipment malfunction is the fault
of the telephone network operator or any interposed private branch extension
system. The terms of the warranty do not apply to the rechargeable batteries or
power adaptors used in the products. The warranty period is 24 months from the
date of purchase.
All deficiencies resulting from material or production faults which occur during
the warranty period will be eliminated free of charge. Rights to claims under the
warranty terms are voided following intervention by the purchaser or third
parties. Damage caused as a result of improper handling or operation, incorrect
positioning or storing, improper connection or installation, Acts of God or other
external influences are not covered by the warranty.
In the case of complaints, we reserve the right to repair or replace defective
parts or provide a replacement device. Replaced parts or devices become our
property. Rights to compensation in the case of damage are excluded where there
is no evidence of intent or gross negligence by the manufacturer.
If your equipment shows signs of a defect during the warranty period, please re-
turn it to the sales outlet where you purchased the SWITEL equipment together
with the purchase receipt. All claims under the warranty terms in accordance
with this agreement must be asserted exclusively with regard to your sales out-
let.
The right to assert a warranty claim expires two years after the purchase of our
products.
Declaration of conformity
This device fulfils the requirements stipulated
in the EU directive: 2014/53/EU.
Conformity with the above mentioned directive is confirmed by the CE symbol
on the device. To view the complete Declaration of Conformity, please refer to
the free download available on our website www.switel.com/support.
Telgo AG, Route D’Agy 16, 1763 Granges-Paccot, Switzerland
Technical Detail
Standard DECT
RF frequency 1.89 GHz
RF power average <10.4 dBm
Power supply (corded phone) Input: 100-240VAC 50/60Hz
Output: 6VDC 450mA
Power supply (charger base) Input: 100-240VAC 50/60Hz
Output: 6VDC 450mA
Range Outdoors approx. 300m,
Indoors approx. 50m
Standby Up to 100hrs
Maximum Talk Time Up to 10hrs
Maximum earpiece volume +24 dB
Rechargeable batteries AAA, 1.2V 400 mAh NiMH
Dialling mode Tone (DTMF) / Pulse
Recall time (Flash) Short (100 ms), Medium (300 ms),
Long (600 ms)
Optimum ambient temperature 0˚C to 45˚C
Optimum relative humidity 20% to 80%
Power adaptor information
Corded phone and Charger
VTech (Qingyuan) Plastic & Electronics Co. Ltd.
Model : VT04EEU06045, Input 100-240V AC 50/60Hz 150mA, Output 6VDC
450mA (EU plug)
Shen Zhen Ruijing Industrial Co. Ltd.
Model : RJ-AS060450E002, Input 100-240V AC 50/60Hz 150mA, Output 6VDC
450mA (EU plug)
V1.1 / 12.2018
