30242
3
Zoom out
Zoom in
Previous page
1/16
Next page
PROFI mc 4000PROFI mc 4000
Version 2.0
3
On the right of the second line you can assign a
switch to the input you have selected. The asterisk
shows whether the switch is ON (asterisk displayed)
or OFF (no asterisk).. Press the R button to reverse
the direction of effect of the switch (ON position for-
ward or back).
This is how it’s done:
First select the servos by pressing the b button in
„Menu 1: Adjustments“, then this menu appears:
Servos adjustments
--------------------
;PNT+SW CENTRE+LIMÄ
,TRAVEL/CURVE SLOW_
The following points have changed:
previously: in Version 2.0:
;TRAV+SW ;PNT+SW
Select No. of curve points (3, 5, 7,
9 or 13) and
assign mixer input switches (can
also be done in the
TRAVEL/CURVE menu).
,CURVE ,TRAVEL/CURVE
Adjust travel and curves for mixer
inputs.
Assign mixer input switches.
SOFT-SW_ SLOW_
Set servo-SLOW times
a. Switches, number of curve points
You reach the „PNT+SW“ menu by pressing the b
button from the „Servo adjustments“ menu. Here you
can assign switches („SW“) for mixer inputs or define
the number of curve points („PNT“) for a mixer input.
No.of points+switch
;SERVO 1:BUTTERFLY
INPUT :AILERON Ä
, 3-PNT ON _
Pressing the b button opens the field for selecting a
servo. Use the q/n buttons or the Digi-adjustor to
leaf through the options.
Pressing the x button opens the field for selecting
the input you wish to process - assuming that more
than one input influences the servo. If only one input
is available, the symbol for the x button does not
appear on the screen.
Pressing the w button opens the field for selecting a
switch. Here you can select any switch type which is
available on your PROFI mc 4000.
Pressing the g button opens the field for selecting
the number of curve points.
If you select a fixed value in this menu, there are no
curve points for you to select or adjust, so the screen
shows „OFF“ at bottom left to indicate that there is
nothing to process here.
b. Adjusting travel and/or curve
You reach the „Travel/Curve“ menu by pressing the
g button in the „Servo adjustments“ menu.
;SERVO 1:BUTTERFLY
,3:SPOILER S01*Ä
"•œ›š™˜— " 50%
" •œ›š™˜—"P: 2•
Pressing the b button opens the field for selecting a
servo. Use the q/n buttons or the Digi-adjustor to
leaf through the options.
Pressing the g button opens the field for selecting
the input you wish to process - assuming that more
than one input influences the servo. If only one input
is available, the g symbol and the name of the input
do not appear on the screen. In this case the settings
apply directly to the selected servo.
Pressing the x button opens the field for selecting a
switch. You can select any type of switch which is
available on your PROFI mc 4000. If you wish to
reverse the direction of operation of any switch in this
menu, press the y button.
'' TIP:
In this menu you can also switch off mixer inputs
temporarily. This is a very useful option, as it allows
you to check settings without being confused by other
mixer inputs. The principle of temporarily switching
inputs off is the key to testing and checking the more
complicated mixers which may have many inputs.
The w button has a special function in this menu,
and its usual symbol is therefore replaced by the spe-
cial symbol „“ here. Pressing this button opens the
lower half of the menu: the curve area.
Now you can:
Select a point on the curve by pressing the g or
w button. The selected point flashes.
The button g only resumes its original function,
1.e. selecting the input, when you press one of
the two top buttons (b or x).
use the q/n buttons or the Digi-adjustor to alter
the set value for the point you have selected.
You can „reverse“ the whole curve by pressing the
y button.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar4000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info