30242
14
Zoom out
Zoom in
Previous page
1/16
Next page
PROFI mc 4000PROFI mc 4000
Version 2.0
14
This is how to set an idle value of 15%:
1. Select the IDLE-UP control, then the TRAVEL
option
Starting from the operating screen press x x x
to move to the menu for the transmitter control
options. Select the IDLE-UP control using q/n
or the Digi-adjustor.
Now open the Options field by pressing b and
search for TRAVEL.
2. Open the TRAVEL adjust field
Pressing the w button opens the field.
3. Select the correct end
Assuming that you want the motor to idle when
the idle-up slider is at the rear end-stop (towards
you), then you must move the slider to this posi-
tion in order to adjust travel.
The screen should now look like this:
2: Hover 1450
CONTR F :IDLE-UP Ä
;TRAVEL
[ - 70%_
The [ symbol indicates that you have selected
the rear half of the control’s travel for travel ad-
justment.
You can now set your chosen idle value using
the q/n buttons or the Digi-adjustor.
Press k k to return to the operating screen and
store the new setting.
'' TIP:
The flight mode display „2: Hover1450“ in the top line
is intended to remind you that the setting in this menu
only applies to this one flight mode!
This is the procedure for
setting the throttle to „run up slowly“:
This is no problem with the new SLOW option for the
IDLE-UP transmitter control.
1. Select the IDLE-UP transmitter control and
the SLOW option.
Starting from the operating screen move to the
transmitter control options menu by pressing x
x x. Select the control IDLE-UP using the
q/n buttons or the Digi-adjustor.
Now open the Options field with the b button
and look for SLOW.
2. Open the adjust fields for SLOW (g or w)
The times for the motor running up and running
down can be adjusted separately.
CONTR G :IDLE-UP Ä
;SLOW
,04.0sec' #02.0sec_
'' TIP:
The top line of the screen is blank. This indicates that
the adjustment applies to all flight modes.
How to „expand“ the low-speed range
for idle-up:
You can use the CENTRE option for the IDLE-UP
control to effect this improvement. Offset the centre
to, say, -30%, then the first half of the control’s travel
affects the range from -70% (that is the control travel
which we have already set - see above) and -30%.
Here is another diagram to make things clearer:
You can immediately see that the top half of the
transmitter control’s travel has more than three times
as much effect as the bottom half.
This allows you to adjust the low throttle range setting
for starting the motor very accurately.
The top range then simply releases the travel for the
throttle curve.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar4000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info