554882

Jablotron GD-04 Manual

5
Zoom out
Zoom in
Previous page
1/15
Next page
GD-04 DAVID 5 MKS51202_OS1*
7. David is not case sensitive (does not distinguish between lowercase and UPPERCASE
letters).
8. The use of accented characters is not recommended.
9. After an SMS message has been received, David switches off both the X and Y relays.
10. See table 1 for a brief instruction list.
7. Remote operation via SMS instructions
When using texts which have been programmed for David SMS operation (relay control, status
interrogation) the following conditions apply:
• David does not distinguish between authorized and unauthorized phones when processing
operational SMS instructions. Instructions can be sent from any phones, but the texts must match the
texts which have been pre-programmed (except the lowercase/UPPERCASE attribute).
• Access codes are NOT part of operational SMSes.
• A single SMS message can contain multiple instructions separated by commas, e.g.
HEATING ON, LIGHTS OFF, STATUS
• David can be so configured that every instruction performance is reported by SMS.
• Received SMSes with unrecognised instructions can be forwarded to the so called service
number (see table 1).
• If you are not sure whether any other text will be automatically added to the SMS on its way to David
(for example, when using an SMS internet gate) type the message like this: %instructions%%.
Example: The SMS text “1/1 www: %heating on%%” is interpreted as heating on.
8. Remote operation via dialling-in
David allows you to control the X and Y relays via dialling-in from pre-authorised phones. If a
call is made to David from a pre-programmed number, the call is rejected and the relay reacts as
follows:
o If a limit is set to the relay switch-on period then the relay switches on for the limit period.
o If no limit is set (zero value is set for the limit) then the relay switches on permanently -
until a switch-off SMS instruction or another dialling-in event occurs.
Notes:
• Up to 50 tel. numbers can be programmed for each relay.
• Each tel. number can have a limit to the number of calls so that any further calls are ignored.
• This feature is not applicable to phones with withheld numbers.
• Dialling-in relay control can be reported by SMS.
9. Using prepaid SIM cards
Prepaid SIM cards are NOT recommended for use in David, because they increase the risk
of David malfunctioning due to a possible credit balance under-run.
If you still decide to use a prepaid SIM card, you can configure David for periodic balance
interrogation. If the reported credit balance is lower than the set limit, the credit balance
message will be automatically sent to the service phone numbers. To program this feature you
need to know some data specific to the GSM provider (see the SIM card documentation). The
programming instruction is of the following form:
PC, CRD, xxxx, dd, hhh, pp
where:
PC is the access code
CRD is the name of the instruction for credit balance interrogation
xxxx is the command string to ascertain the credit (GSM network specific, e.g. *104#)
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-gd-04

Reset search

  • I can’t work out how to register new phone numbers to our David garage gate system - the only resident who knew how has moved away. It works fine with my phone which is registered but some people who have just moving in would like to add their numbers . Any help would be greatly appreciated! Submitted on 23-5-2020 at 15:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron GD-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-04 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info