554882

Jablotron GD-04 Manual

4
Zoom out
Zoom in
Previous page
1/15
Next page
GD-04 DAVID 4 MKS51202_OS1*
All parameters are sufficiently described on the page so that you do not need to use David’s
installation or user manual to perform programming.
Programming via the web site is free of charge. No user registration is required. Your David’s
settings are not stored on the web server. Instead, you can save them as a file in your computer
for future use (the file can then be imported to the page). The page does not allow you to
retrieve the current settings of your David. Any programming is only possible if a valid access
code is specified (the code, being a part of David’s settings, is not stored on the web server, only
in your David). This makes the web access to your David both secure and simple.
6.2. Using a PC running GDLink software
If you need to program David frequently, connecting David to a PC running specialized
software is the recommended option. GDLink software allows you not only to send programming
instructions but also to retrieve the current David settings. For the PC connection, you can use a
GD-04P link cable connected to a USB port (the cable is supplied separately). GDLink software
is available either in the GD-04P’s package or on the www.jablotron.cz
web site.
David’s communication protocol is available for use by other computer programs which can
thus utilize GD-04 transfers (including programming instructions or GSM status information).
6.3. SMS instructions
David can also be configured via SMS instructions from your mobile phone. The programming
instruction format is explained in the following example:
PC, ARX, heating on, DRX, heating off
where:
PC is the access (programming) code, required at the start of any programming
SMS message* (2 to 8 ASCII characters, the factory default setting is PC)
, is a comma separator
ARX is the name of the instruction for programming the text you wish to use for
switching relay X on via SMS. The desired text (“heating on”) follows, separated
by a comma.
DRX is similar to ARX, related to switching relay X off.
The above SMS instruction tells David that the X relay can be switched on/off by the SMS
instructions “heating on” / ”heating off”.
Note:
This text distinguishes between SMS messages and SMS instructions – an SMS message
can contain multiple SMS instructions in a sequence.
SMS instruction rules:
1. Any programming SMS message must start with a valid access code (the factory default
code is PC). Multiple messages mean multiple codes.
2. A single message can contain multiple instructions. David is capable of long message
processing – if enabled by your phone, you can write and send a programming SMS
message containing up to 2400 ASCII characters.
3. The comma separator is used both between individual instructions and between individual
segments within instructions.
4. Spaces are ignored, except in operational texts which are meant to be a part of a David
setting.
5. The successful processing of a programming SMS is confirmed from David by the SMS
reply “PROGRAM OK”.
6. When an error is encountered, David reports a “PROGRAM ERROR” followed by the text of
the instruction which has not been recognized. Preceding instructions within the message
are carried out, succeeding instructions are ignored.
… 4 …


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-gd-04

Reset search

  • I can’t work out how to register new phone numbers to our David garage gate system - the only resident who knew how has moved away. It works fine with my phone which is registered but some people who have just moving in would like to add their numbers . Any help would be greatly appreciated! Submitted on 23-5-2020 at 15:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron GD-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-04 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info