554882

Jablotron GD-04 Manual

13
Zoom out
Zoom in
Previous page
1/15
Next page
Additional functions
New access code
NPC, xx…x xx…x = new access code, 2 to 8 characters
Example: NPC, MARTIN27
PC
SMS to get David’s status
STS, xx..x xxx..x = text, up to 30 characters
Example: STS, HOW ARE YOU NOW
STATUS
Service tel. numbers
STN, x..x, x..x xxx..x = tel. number. Up to 2 numbers can be
set, previously set numbers are erased.
Service numbers are used to report faults:
POWER FAIL / POWER RECOVERY
1
LINE OK (GSM signal recovery)
Other events – see Optional functions.
Instruction STN, erases service number(s).
none
Optional functions
DIP,a,b,c,d,e,f,g Parameter a to f values can be:
1=ON, 0=OFF, x=unchanged
Description of the parameters:
a Forward unrecognised SMSes to the
service number
b Periodic calls to the service number every
24 hours (from the moment of being set)
c Forward all SMSes to the service number
d Max. 10 SMSes within 15 minutes (all
subsequent SMS requests ignored)
e SMS reporting of relay dialling-in-control
f SMS reporting of relay SMS control (e.g.
heating off OK)
g Input terminal GND connection disables
any wireless connection to the input (not
applicable to thermostats)
Example: DIP,1,x,x,x,x,1,x
0000000
(all OFF)
DTMF code to switch relay
ON
2
CAX, xx..x Use CAY for relay Y.
xx..x = numeric code, up to 8 digits
Example: CAY, 1234
Instruction CAY, erases the code.
none
DTMF code to switch relay
OFF
2
CDX, xx..x Use CDY for relay Y.
xx..x = numeric code, up to 8 digits
Example: CDY, 1234
Instruction CDY, erases the code.
none
Wireless device
assignments
3
LRN,n,xx..x,n,x. n = A, B, C, D, X or Y (input or output the
device should be assigned to)
xx..x = device production code (last 8 digits)
Only one device can be assigned to each A
to D input, whereas each of X or Y relays can
have up to 4 devices enrolled.
Example: LRN,A,xx..x,B, xx..x, X,xx..x
Instruction LRN, erases all assignments.
A device cannot have multiple assignments.
The order of A to Y is arbitrary, no
duplications are allowed.
none
Triggering re-registration
to the GSM network
GSM
David will unregister and then re-register to the
GSM network. This can be useful after a blocked
SIM card has been unblocked. A re-registration
is also triggered by briefly connecting the RESET
jumper while David is being powered up.
Reset
RST
Resets David to the factory default settings.
This can also be performed by connecting the
RESET jumper during powering up –
disconnect the jumper after approx. 5 sec.
1
Only available for the GD-04A version
2
Only available for the GD-04D version
3
Only available for the GD-04R version
… 13


Need help? Post your question in this forum.

Forumrules
1

Forum

jablotron-gd-04

Reset search

  • I can’t work out how to register new phone numbers to our David garage gate system - the only resident who knew how has moved away. It works fine with my phone which is registered but some people who have just moving in would like to add their numbers . Any help would be greatly appreciated! Submitted on 23-5-2020 at 15:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron GD-04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-04 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info