Manual Jablotron GD-04 (page 12 of 15) (English)

554882

Zoom out

Zoom in

1/15

GD-04 DAVID 12 MKS51202_OS1*

Table 1 – A brief list of programming SMS instructions

Any programming SMS message must start with a valid access code (see 6.3).

Example: PC, ARX, heating on, DRX, heating off

Function

Instruction Description

Factory

default

Relays X and Y operation

SMS to switch relay ON

ARX, xxx..x Use ARY for relay Y. xxx..x = text (up to 30

characters), text erased by ARX, ,

Example: ARY,ventilator on

erased

SMS to switch relay OFF

DRX, xxx..x Use DRY for relay Y. xxx..x = text (up to 30

characters), text erased by DRX, ,

Example: DRY,ventilator off

erased

Relay switch-on period

TMX, t..t

Use TMY for relay Y.

t..t = switch-on period in seconds, or zero

• 1 to 36000 (10h): the relay works as a time-

switch, activated via switch-on SMSes or

dialling-in, deactivated by time-limit expiration

or via switch-off SMSes.

• 0: no time-limit applies, dialling-in is responded

to with toggle logic: on – off – on…

(no limit)

Telephone numbers

authorised for relay control

ADX, x..x,x..x

Use ADY for relay Y.

x..x = tel. number. Up to 50 numbers can be entered

(in a single instruction or gradually). The numbers are

added to the list of authorised numbers. Example:

ADX, 777123456, +420608503211 authorises two

new numbers for relay X control.

Telephone numbers

authorised for relay control

with a validity limit.

LDX, x..x,n,

x..x,n

Use LDY for relay Y.

x..x = tel. number. The numbers are added to the list of

authorised numbers, up to 50 in total.

n = limit in the number of calls (1 to 99), exceeding the

limit removes the number from the list – this is reported

to the service number by SMS.

Example: LDX, 777123457, 31 authorises a new

number for relay X control for a maximum of 31 calls.

empty

list

Erasing tel. numbers

authorised for relay control

EDX, x..x, x..x Use EDY for relay Y. x..x = tel. number. The

numbers (up to 50) are removed from the list.

Example: EDX, 777123457 de-authorises a single

tel. number used for relay X control.

–

Input A to D activation/deactivation SMS reports

Input activation text

ATA, xx..x

Use ATB for input B, etc.

xxx..x = text (up to 30 characters*)

Example: ATC, heating on

Instruction ATA , , erases the text = no reports

A1,

B1,

C1,

Input deactivation text

DTA, xx..x

Use DTB for input B, etc.

xxx..x = text (up to 30 characters*)

Example: DTC, heating off

Instruction DTA , , erases the text = no reports

A0,

B0,

C0,

Telephone numbers for

input reports

TNA, x..x, x..x

Use TNB for input B, etc.

x..x = tel. number, up to 8 for each input. All

previously stored numbers are erased. Use TNA,

to empty the list.

Example: TND, 777123456, 608123456 sets

David to report input D events to 2 numbers

empty

list

Input-event calls

DNA, n Use TNB for input B, etc., n = 1 (ON), 0 (OFF). If

set to ON, every SMS report is followed by a call.

If you answer the call, you hear a constant tone =

activation, or an interrupted tone = deactivation.

Example: DND, 1

OFF

I can’t work out how to register new phone numbers to our David garage gate system - the only resident who knew how has moved away. It works fine with my phone which is registered but some people who have just moving in would like to add their numbers . Any help would be greatly appreciated! Submitted on 23-5-2020 at 15:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron GD-04 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jablotron GD-04 Manual

Product: