479878
5
Zoom out
Zoom in
Previous page
1/8
Next page
PAGE 08 - INSTALLER MANUAL INSTALLER MANUAL - PAGE 09
8.0 - CONNECTION FOR TURN SIGNALS ACTIVATION
GEMINI 822
SYSTEM
GEMINI 822
SYSTEM
GEMINI 822
SYSTEM
ORANGE
WHITE-ORANGE
ORANGE
ORANGE
WHITE-ORANGE
ORANGE
8.2 - CONNECTIONS ON VEHICLES WITH SEPARATE LINES
8.3 - CONNECTIONS TO HAZARD PUSH-BUTTON
VEHICLE
ELECTRICAL
EQUIPMENT
BLUE
WHITE-ORANGE wire to be connected
ONLY if system operates through turn
indicators.
WHITE-ORANGE wire to be connected
ONLY if system operates through turn
indicators.
Insert nr. 6
2 Ampere
diodes.
S
.
elect “visual impulse
signals” in “SYSTEM
PROGRAMMING” menu.
Do not use if system
operates through turn
indicators
9.0 - CENTRAL DOOR LOCKING CONNECTIONS TO ARM SYSTEM
!
“ON”.
“C”, “D”, “E” connection).
“ON”.
9.1 -
9.2 -
9.3 - CONNECTIONS TO THE TURN INDICATORS
Central door locking must be connected according to vehicle type (see installation diagrams).
The various arming modes are listed below and the connections indicated in the following
paragraphs.
Arming through door locking motor unit.
Arming through door locking motor unit and locks control switches.
Arming through self-learning of turn indicators signals.
Arming through turn indicators signals and door locking motor unit.
Arming through turn indicators signals, door locking motor unit and locks switches.
Arming/disarming connections for vehicles with radio receiver separated from CDL (see www.gemini-
alarm.com for diagram “A” connection).
Set dip-switch nr. 4
Arming/disarming connections for vehicles that require not only connections to door locking motor unit
but also control of lock switch or of internal door lock buttons (see www.gemini-alarm.com for diagram
Set dip-switch nr. 4
!
!
!
!
CONNECTIONS - DOOR LOCKING MOTOR UNIT WITH SEPARATE RADIO RECEIVER
CONNECTIONS - DOOR LOCKING MOTOR UNIT WITH LOCK SWITCH
Connect door locking motor unit, if turn indicators signals are identical on locking and
unlocking.
If the turn indicators flash when unlocking with the car mechanical key, do not make this
connection.
!
!
The arming/disarming connection is made by connecting the WHITE-ORANGE wire to the turn
indicators.
If arming/disarming connection is activated only by turn indicators, set dip-switch nr. 4 “OFF”.
If arming/disarming connection is activated by turn indicators and door lock motor unit, set dip-switch
nr. 4 “ON”.
LEFT TURN
INDICATORS
RIGHT TURN
INDICATORS
TURN INDICATORS
CONTROL UNIT
Front
SX
Rear
DX
Side
SX
Side
DX
Rear
SX
Front
XD
8.1 - CONVENTIONAL CONNECTION
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 821 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gemini 821

Gemini 821 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info