810623

BeF Home Passive - HOT AIR FIREPLACE INSERTS Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
________________________________________________________________________________________________________________________________
Firma: BeF Home, s.r.o. Strana 7 (celkem 9) Platí od: 1. 4. 2014
Vydání: 4
Coating (fireplace surround): The coating of the fireplace insert which leads into the room must be made of non combustible material of
grade A1 (e.g. tiles, plaster coat, iron or ceramic tiles). There must not be any direct contact between the coatings and the fireplace
insert. The coating may overlap only on the separate carrying frame which is clamped to the wall. For adjustment, maintenance of a
safety valve, a pump and accessories or possible repairs it is necessary to provide the surround with service holes. These holes are
necessary for these operations and it is not needful to build the surround.
Ornamental beams: Ornamental beams are allowed in front of the fireplace coating at a distance of 1 cm at least if the ornamental beam is
not a part of the building and the intermediate space is such that it does not accumulate heat and the ornamental beam is not situated
within the area of the insert heat radiation ( pict.5)
obr. 5
Fire protection above a heat radiation area:
A minimum distance of 80 cm forwards and sideways must be retained in
front of the firebox hole (pict.5, position 1). If the protection against heat
radiation is from both sides, a distance of 40 cm is enough (pic. 5, position
2).
Fire prostection above a heat radiation area:
A minimum distance of 5 cm from the outer space of the insert coating to noncombustible building panels must be retained. Air space must be
clear so as not to accumulate heat (pict. 5, position 3). Building panels covering only small coated areas of the fireplace insert, e.g. floors, wall
coating and thermal insulation layers may abut onto the coating (pict. 5, position 4). Wider combustible building panels, e.g. ornamental beams,
may be at a distance of 1 cm from the insert coating (see Ornamental beams)
External combustion air income:
Hot AIR fireplace inserts are adjusted for direct connection for external combustion air inflow. Bellmouth of diameter of 120 – 150 mm for
external combustion air connection is ending on the back side (or bottom side) of the fireplace insert. Inflow for outdoor air connection for
combustion in a fireplace insert must have as few bends as possible. For air inflow within the distance of 1.5 m with one bend (max. 90°) it is
possible to use a pipe of diameter 100 mm. For air inflow within the distance of 3 m with one or two bends (total disjunction of angles 135°) it is
possible to use a pipe of diameter 125 mm. When there is longer distance and more bends, it is necessary to take into account air resistance
caused by friction of tube walls. It is possible to supply hot air fireplace inserts with automatic electronic regulation of the combustion process.
Automatic regulation consists of control unit, control damper and temperature sensor. Control dumper must be situated in supply pipes, as close
as possible to fireplace insert and connect hermetically onto bellmouth of the air inflow. After building of the fireplace, the dumper must be
accessible for service. When automatic regulation is in use, it is convenient to set up the hand-operated element in the 2/3 open position
(providing right proportion of the air for nominal output of the insert). Also, fireplace insert can be fitted with door contact for easy service
(position of the door contact is described below in paragraph “door adjusting and unhanging). More detailed description of connection and
installing you will find in installing document of Automatic regulation.
Firebox running:
Fireplace inserts are suitable for only closed spaces
Fuel:
Fireplace inserts can be operated only with the following fuel: dry wooden logs
ONLY DRY WOOD LIBERATES LITTLE HARMFUL POLLUTANTS DURING BURNING!!!
A fireplace insert is not suitable for waste burning!!!
Combustion air input:
It is necessary to supply a sufficient amount of external air into the room when using the fire. Both open and closed fireplaces require an
adequate amount of fresh air. The steps for combustion air input cannot be changed and combustion air inputs must be open during the working
operation of the firebox.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeF Home Passive - HOT AIR FIREPLACE INSERTS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeF Home Passive - HOT AIR FIREPLACE INSERTS in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info