810623
1
Zoom out
Zoom in
Previous page
1/9
Next page
________________________________________________________________________________________________________________________________
Firma: BeF Home, s.r.o. Strana 1 (celkem 9) Platí od: 1. 4. 2014
Vydání: 4
INSTALLATION AND SERVICE INSTRUCTIONS FOR HOT AIR FIREPLACE INSERTS BeF
Passive
Important:
Inform your local chimneys sweep!
Read the complete installation and service instructions!
Keep to the regulations and orders of these instructions during installation and service of this fireplace insert!
Keep to the appropriate standards during fireplace insert installation and service!
Keep these instructions in a safe place!
These instructions contain the Equipment Certificate!
We recommend ordering a professional firm to install the insert
Congratulations!
You have chosen a product of high quality, the hot air fireplace insert. Read carefully these service instructions. You will get the information
about function and operation of your fireplace insert; you will increase its value and its service life. Also you can save fuel and protect the
environment.
Fireplace inserts BeF Passive mean to be used in low energetic and passive houses. These inserts were approved by German Institute for Civil
Engineering DIBt. All BeF Passive models meet the criterias of Blower door test which rate is displayed in your certificate. In order to fulfill
all norms of low energetic passive houses follow, please, all instructions given below.
We can provide a guaranty for our products only when the installation and service instructions are kept.
Essential requirements:
It is necessary to ensure that the whole unit with connecting piece and chimney will be safe during operation. The whole unit must be
safe and easy to clean.
- THE DATA OF SAFETY PRECAUTIONS FROM THE POINT OF VIEW OF FIRE PROTECTION IN ACCORDANCE
WITH NATIONAL STANDARDS.
- Be especially careful to maintain a minimum distance from any combustible subjects during the fireplace installation in the
standard, according to national norm.
- The minimum safe distance from combustible material with combustibility degree of B, C1 and C2 is min. 200 mm. For a
combustibility degree of C3 and for unsubstantiated combustibility degree in accordance with national technical standards and
regulations it is necessary to double the distance.
- The unit may be used in a normal environment in compliance with national technical standards and regulations. When this
environment changes and there could be a temporary fire or explosion risk (e.g.at work with paint substances, at linoleum mounting,
etc.) the unit must be removed immediately.
Note: The fireplace insert must be situated a safe distance from other room equipment.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeF Home Passive - HOT AIR FIREPLACE INSERTS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeF Home Passive - HOT AIR FIREPLACE INSERTS in the language / languages: English as an attachment in your email.

The manual is 0.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info