478499

Yaesu FT-857D Manual

78
Zoom out
Zoom in
Previous page
1/132
Next page
76 FT-857D Operating Manual
Memory Channel Recall
1. If you currently are in the VFO tuning mode, press the
[
M/V
]
key once to enter the
“Memory” mode (a memory channel number “M-nnn” will appear on the display in the
space previously occupied by “VFOa” or “VFOb”).
2. To select another memory channel, turn the SELECT knob.
3. When your memory channels are partitioned into Memory Groups via Menu Mode No-
055
[
MEM GROUP
]
, it is easy to change Memory Groups; press the SELECT knob
momentarily (a Group Number (“Ma” ~ “Mj” will blink), then turn the SELECT knob
to step through the channels until you enter another. You may now press the SELECT
knob once more to restrict memory channel access to the newly-selected Group.
Menu No-057 must be set to “MHz/MEM GRP” in order to select Memory
Groups!
4. Once you are operating on a memory channel, you may tune off of the originally-memo-
rized frequency (as though you were in the VFO mode). Just rotate the DIAL knob; the
“Memory Channel Number” will be replaced by one which indicates “MTUNE,” indi-
cating that you have now shifted into the “Memory Tuning” mode. When operating the
Memory Tuning mode, if you find another frequency you wish to store into another
memory channel, just press the
[
A
](
MW
)
key momentarily, select a new memory chan-
nel via the SELECT knob, then press and hold in the
[
A
](
MW
)
key until you hear the
double beep.
5. To exit the Memory Tuning mode, press the
[
M/V
]
key as follows:
• One touch of the
[
M/V
]
key returns you to the original memory frequency.
• A second touch of the
[
M/V
]
key will cause you to exit the Memory mode and return
to the VFO mode (the memory channel number will be replaced by “VFOa” or
“VFOb.”
1) When operating on a “Split” frequency memory, a special “–+” indication will
appear on the LCD.
2) If some memory channels appear to be “missing,” be sure you are not operating in the
“Memory Group” mode, and in the wrong Memory Group.
MEMORY OPERATION
MEMORY OPERATION ON “REGULAR” MEMORY CHANNELS
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info