478499

Yaesu FT-857D Manual

80
Zoom out
Zoom in
Previous page
1/132
Next page
78 FT-857D Operating Manual
MEMORY OPERATION ON “HOME” CHANNEL MEMORIES
Four Special one-touch “Home” channels are available, for special frequencies you use
often. Either “simplex” or “split” frequency/mode data may be stored in the “Home” chan-
nel locations. Special “Home” channels are available for HF (any frequency between 1.8
and 29.7 MHz), 50 MHz, 144 MHz, and 430 MHz.
These memories may prove particularly useful for monitoring propagation beacons, pro-
viding one-touch recall of the beacon frequency for a quick check of band conditions.
HOME Channel Storage
1. Tune the desired frequency, and set the operating mode. If this is an FM channel, set up
any required CTCSS/DCS and repeater shift configurations.
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily to enter the “Memory Check” mode.
4. Press and hold in the
[
HOME
]
key for one second. This stores the frequency data into
the “Home” channel location. As usual, you will hear a double beep to confirm the
successful storage of the frequency data.
5. If you wish to store a “Split” frequency pair into the “Home” channel, store the Receive
frequency as in steps 1 ~ 4 above. Now set the desired Transmit frequency. Once more,
press the
[
A
](
MW
)
key momentarily. Press and hold in the microphone’s PTT switch;
while holding the PTT switch, again press and hold in the
[
HOME
]
key for one second.
This stores the transmit frequency data into the “Home” channel location.
In step (4) above, pressing and holding in the [HOME] key stores the frequency
data, and leaves the Alpha-Numeric tag for this channel as “HOME.” If you wish
to re-label the Home channel with a different name, press the [HOME] key momentarily
in step (4), then follow the instructions on the next page for the programming of an
Alpha-Numeric Tag.
HOME Channel Recall
1. Press the
[
HOME
]
key momentarily to recall the Home Channel on the band group
where you currently are operating (HF, 50 MHz, 144 MHz, or 430 MHz). The “HOME”
indication will appear on the display.
2. Press the
[
HOME
]
key once more to return to the previously-used frequency (either a
VFO frequency or a memory channel).
MEMORY OPERATION
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info