478499

Yaesu FT-857D Manual

77
Zoom out
Zoom in
Previous page
1/132
Next page
75FT-857D Operating Manual
Split-Frequency Memory Storage
You can also store “Split” frequencies, such as when operating on a repeater system not utiliz-
ing a “standard” offset. This procedure may also be used for DX work on 7 MHz SSB, etc.
1. In the VFO mode, set the desired Receive frequency and mode.
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily to enter the “Memory Check” mode, which is used
to find an unused memory channel. The Memory Channel Number notation at the upper
left corner of the LCD will blink, and the frequency stored (if any) on the selected
memory channel will be shown in the display. Rotate the SELECT knob to select the
channel on which you wish to store the receive frequency data.
4. Press and hold in the
[
A
](
MW
)
key for one second until you hear two beeps (a second
apart), which confirms that the Receive frequency data is now stored.
5. Now, set the desired Transmit frequency and mode on the VFO.
6. Press the
[
A
](
MW
)
key momentarily; do not rotate the SELECT knob!
7. While the Memory Channel Number is blinking, press and hold in the PTT switch;
while holding it in, press and hold in the
[
A
](
MW
)
key for one second.
8. The two beeps will confirm that independent Transmit frequency data is now stored.
You may now release the PTT switch.
In step 7 above, pressing the PTT switch does not activate the transmitter. It sim-
ply sends a signal to the microprocessor that an independent Transmit frequency
is being stored on the same channel as a previously-stored Receive frequency.
MEMORY OPERATION
MEMORY OPERATION ON “REGULAR” MEMORY CHANNELS
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info