478499

Yaesu FT-857D Manual

76
Zoom out
Zoom in
Previous page
1/132
Next page
74 FT-857D Operating Manual
MEMORY OPERATION ON “REGULAR” MEMORY CHANNELS
Most Memory operation will be conducted in the “regular” memory registers. There are
200 memory channels available for storage and recall of important frequencies.
Normal Memory Storage
1. Tune in the desired frequency, and set the operating mode. If this is an FM channel, set
up any required CTCSS/DCS and repeater shift configurations. Standard (default) re-
peater shifts do not require you to utilize the “split” frequency memory technique, de-
scribed later.
2. Press the
[
FUNC
]
key momentarily, then rotate the SELECT knob, as needed, until
Multi Function Row “b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily to enter the “Memory Check” mode, which is used
to find an unused memory channel. The Memory Channel Number notation at the upper
left corner of the LCD will blink, and the frequency stored (if any) on the current memory
channel will be shown in the display. Rotate the SELECT knob to select the channel
number on which you wish to store the current frequency data.
4. If you just want to program in the frequency data, press and hold in the
[
A
](
MW
)
key
for one second until you hear two beeps, a second apart; the second beep confirms that
the frequency information was successfully stored. If you want to assign an Alpha-
Numeric Tag (label) to this Memory location, see the next step.
5. If you wish to assign an Alpha-Numeric Tag to this memory location, do not press and
hold in the
[
A
](
MW
)
key in step 4; instead, press it momentarily; the display will now
show the default Tag for the Memory Channel (“CH-nnn”), and a cursor will be blinking
below the “C.” Now follow this procedure;
• The blinking cursor indicates that the first character is awaiting assignment of a
letter, number, or symbol. Rotate the DIAL knob to select the desired first letter in
the proposed Tag. Note that both upper and lower case letters are available.
• Rotate the SELECT knob one click clockwise to move to the next character posi-
tion.
• Rotate the DIAL knob to select the desired 2
nd
character, then rotate the SELECT
knob one click clockwise to move on to the next position.
• Continue this process until the Tag is complete. Now move quickly to the next step.
• When the Tag is complete, press the
[
A
](
MW
)
key momentarily. This will complete
the storage of the frequency and Alpha-Numeric label.
MEMORY OPERATION
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info