478499
74
Zoom out
Zoom in
Previous page
1/132
Next page
72 FT-857D Operating Manual
Antenna Tuner Memory System
The FC-30, working in concert with the FT-857D, can store impedance matching data in
its micro-computer memory, so as to provide instant adjustment as you transmit in different
areas of a particular band. A total of 100 memories are provided: 11 of these are “general”
memories apportioned one per band, while the remaining 89 are allocated for specific fre-
quency data within the various bands, with the capability to resolve new tuning data every
10 kHz.
A few guidelines should be noted regarding the FC-30s memory system:
Tuning data is stored when you make an active effort to store it by pressing and holding in
the
[
A
](
TUNE
)
key for one second. Although the tuner will automatically activate itself if it
encounters more than 1.5:1 SWR, this memory will not be stored unless you have pressed
the
[
A
](
TUNE
)
key for one second. This allows you to store your favorite operating fre-
quency areas into tuner memory without tying up memory space with matching data on
seldom-used frequencies.
If the FC-30 cannot resolve a satisfactory match because the SWR is above 3:1 (2:1 on the
50 MHz band), the tuning process will stop, and no memory data will be stored. However,
you may wish to move frequency a few kHz, then press the
[
A
](
TUNE
)
key again for one
second, as slight changes in the reactance may allow a match to be obtained. Then go back
to the original frequency and try again.
Another technique which may allow matching in some situations is to add a few feet or
meters of coaxial cable on the “antenna side” of the FC-30. This will change the impedance
transformation taking place in the coaxial cable, possibly moving the impedance presented
to the FC-30 into an acceptable range. Note that this is not changing the actual antenna
SWR, but only the impedance “seen” by the FC-30s matching circuits.
If your antenna system presents an SWR of less than 1.5:1, you may wish to turn off the
antenna tuner, as full transmitter power will be delivered to the antenna system without
intervention by the FC-30.
If the impedance encountered by the FC-30 exceeds 3:1, and the “HSWR” icon is illumi-
nated, the microprocessor will not retain the tuning data for that frequency, as the FC-30
presumes that you will want to adjust or repair your antenna system so as to correct the high
SWR condition.
TRANSMITTER OPERATION
FC-30 AUTOMATIC ANTENNA TUNER OPERATION
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info