655956
75
Zoom out
Zoom in
Previous page
1/160
Next page
Operating and maintenance notes
ENGLISH 35
x Remove the coupling cover (e).
x Remove the old ribbed belt (f) or any residue of
the old ribbed belt and any other foreign bodies.
x Use a small brush or paintbrush to clean the
open area.
x Place a new ribbed belt on the grooved running
surface (g) on the drive side behind the coupling
bell (h).
x Put the other side of the ribbed belt on the
grooved running surface (i) of the ribbed belt
support on the output side.
x Check that the ribbed belt is running freely. Correct placement of the ribbed belt if required.
x Put on the coupling cover again and check that the ribbed belt is still running freely. If required, remove
the coupling cover again and correct placement of the ribbed belt.
x Tighten all 3 attachment screws (d) of the coupling cover (e) again.
x Check that the ribbed belt is still running freely. If required, loosen the coupling cover screws again and
correct placement of the ribbed belt.
x Unscrew both attachment nuts (a) of the ribbed belt cover again.
x Put on the ribbed belt cover (14) again.
x Screw on both attachment nuts (a) of the ribbed belt cover again. Only tighten the nuts manually so that
the ribbed belt tension can still be set.
x Turn ribbed belt tension screw (13) towards the right, e.g. clockwise, to increase the ribbed belt tension).
The correct tension is reached when the square nut (b) is on the centre mark, i.e. between "+" and "".
x Tighten both attachment nuts (a) of the ribbed belt cover.
x Close the water supply valve lever, i.e. put the valve lever across the connection piece.
The fuel filter in the fuel tank must be replaced as part of the annual customer service in a specialist
workshop authorised by us.
8.7 Fuel filter replacement
h
g
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info