655956
73
Zoom out
Zoom in
Previous page
1/160
Next page
Operating and maintenance notes
ENGLISH 33
x Take air filter by the air filter frame (e) and remove upwards.
x Simple contact or brush out of the individual paper layers (g) is best to clean the air filter.
x Take power tool with both hands to empty the air filter box (h).
x De-dust fine-meshed cover (f) next to the air filter box with a dry brush.
x Insert air filter again.
x Install housing parts again.
At re-installation of the housing parts, ensure correct placement of the housing parts, use the
corresponding screws and tighten all screws again.
The guard attachment screws (a) and (b) must not be swapped. The two guard attachment
screws (b) are shorter than the screws (a).
Danger of contamination for the power tool inside!
Only open the spark plug cover in a clean environment.
The spark plug must be inspected regularly every 50 operating hours.
x Switch off the engine: Î Chap. 6.2, page 24
x Loosen attachment screw (a), lift spark plug cover (8) by the tab and then remove it.
x Remove spark plug connector (b) from the spark plug (d) below.
Danger of fire from spark formation!
Do not start up the engine with the spark plug (d) unscrewed or the ignition cable (c) removed from
the plug.
x Unscrew spark plug (d) and dry off well.
x Clean spark plug with dry cloth and check electrodes. There must not be any foreign material between
the electrodes. Brush out any foreign bodies with a spark plug brush.
x If the electrodes are strongly burned down, the spark plug must be replaced at once – otherwise, it must
be replaced after 100 operating hours.
x Proper electrode distance: 0.5 mm [approx. 0.02"]
Replace the spark plug if the electrode distance is incorrect.
The following interference-suppressed spark plugs are approved for
use in this power tool:
BOSCH WSR6F, CHAMPION RCJ-6Y and NGK BPMR7A
Use of other spark plugs is not allowed!
8.5 Spark plugs check and replacement if required
0.5 mm [approx. 0.02"]
a
8
c
b
d
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info