655956
77
Zoom out
Zoom in
Previous page
1/160
Next page
Operating and maintenance notes
ENGLISH 37
The following notes refer to regular usage situation.
Under special conditions, such as long daily working times, the maintenance
intervals stated must be reduced accordingly.
Perform maintenance work at regular intervals.
Charge a specialist workshop authorised by us if you cannot perform all work
on your own.
The owner of the power tool is also responsible for:
x Damage from unprofessional or belated maintenance or repair work
x Subsequent damage – also corrosion – in case of improper storage
Once after 5 operating hours
Before and during each working operation
Weekly
Every 50 operating hours
Every 100 operating hours
On demand
At start-up / annually
Cooling air openings in the
starter housing
Clean
X X
Carburettor
Î Chap. 8.3, page 31
Check idling
X
Set idling (screw "T")
X
Set carburettor (screws "L"/"H")
(for specialist workshops only)
X
Air filter
Î Chap. 8.4, page 32
Clean air filter thoroughly
X X
Replace
X
Screen filter of the water supply
line
Î Chap. 8.2, page 30
Clean
X X
Spark plug
Î Chap. 8.5, page 33
Check firm seat of ignition cable and spark
plug connector
X X
Check electrode distance and replace
spark plug if required
X X
Replace
X X
All screws in reach
(except for adjustment screws)
Re-tighten
X X X
Operating units
(stop button/switch, throttle control,
throttle control lock, starter)
Check function
X
Entire power tool
Visual condition inspection
x Check cut-off wheel and muffler for
damage.
x Check tank cap for tightness
X
x Check ribbed belt tension
Î chap. 5.6, page 20
X
Clean
X X X
Furthermore, a specialist workshop authorised by us must be charged, among others, with the following
service in the scope of the annual customer service:
x Complete inspection of the entire power tool
x Professional motor cleaning (fuel tank, cylinder ribs, …)
x Inspection and, if applicable, replacement of the wear parts, in particular annual replacement of the fuel
filter
x Best settings of the carburettor
8.9 Maintenance plan
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 879-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 879-12 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info