619671
5
Zoom out
Zoom in
Previous page
1/12
Next page
UK • 5
Return to contents
Installing My-Speed
My-Speed comes with a windscreen suction cup bracket to mount the unit on to your vehicles windscreen.
When installing your My-Speed please consider the following:
The unit’s built-in GPS antenna has a clear view of the sky.
It is located in a position where you can easily view the LCD display without having to take your eyes too far from the road ahead
and that you can reach the controls safely.
Does not interfere with the vehicles controls
Does not jeopardise the drivers or passengers safety.
You will be able to remove the device to perform downloads.
When adjusting the angle of the windscreen bracket please remove the My-Speed from the bracket FIRST before adjusting.
PLEASE NOTE: Be careful to choose a location that does not obscure the drivers view or where it might endanger the driver or
passengers should your vehicle suddenly come to a stop or be involved in an accident.
Installing My Speed using the windscreen Suction Cup bracket
Select a position within the windscreen so that the top of the unit has a clear view of the sky,
remembering that you need to connect the power connection cable as well as ensuring that
you can read the LCD display and reach the controls safely.
Clean the area where you wish to position the bracket thoroughly with a good quality
glass cleaner
Adjust the angle of the bracket so that when the unit is attached to it you can view the
display and operate the controls safely. Do not adjust the angle of the bracket when My-
Speed is attached.
Press the suction cup against the windscreen
Slide My-Speed onto the bracket.
To remove My-Speed from the windscreen bracket, simply slide the unit upwards off the
plate.
Power the device using the power cable provided. Connect the USB plug on one end of
the power cable into the socket marked USB on the back of My-Speed and plug the larger
plug into the cigarette lighter socket of your vehicle.
To turn on My-Speed press and hold the power button on the front of the device for 2
seconds.
Please note that no power cable other than the one provided with My Speed should be
used. My Speed operates on 5V DC and the power cable included is specifically designed
to provide this voltage. Using an alternative power cable could damage the unit and will
void the warranty.
Do not leave My-Speed plugged into the cigarette lighter socket when you start your
vehicle. The cigarette lighter socket is prone to power surges as the vehicle is started and
this may cause damage to your unit.
DO NOT leave the unit in view when the car is unattended during hot conditions. Exposing My-Speed
to extremely high temperatures can temporarily impair performance. Keep My-Speed out of sight
when not in use to help avoid potential theft.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper MySpeed Aura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper MySpeed Aura in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info