619671

Snooper MySpeed Aura Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
UK • 7
Return to contents
Operating Instructions
1. Using My-Speed for the first time
Make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings so that the built-in GPS antenna has
as clear a view of the sky above. Switch the unit on by pressing the Power button for two seconds. The LCD display will briefly display
the ‘My-Speed’ logo, then the speed limit of the road you are currently travelling on. My-Speed needs to acquire a minimum of four
satellites in order to work. Once this has been achieved the GPS indicator displayed on the top right hand corner of the screen will
show the current GPS strength and will show your correct speed when driving. Once a good GPS connection has been obtained My-
Speed is ready to use.
As the GPS engine and antenna have never been used before, the first ‘Cold’ start could take anywhere from 15 – 50 minutes
to establish a satellite connection. Once initialised, subsequent start ups will take less time and eventually should take only a
matter of minutes.
Please Note: If the unit is not used for some time the initial GPS start up may take longer than when the unit is used regularly.
2. Standby Screen
You can change the background screen colour between black and white. To change the screen colour:
Press the ‘M’ button on the right hand side of the unit to enter the menu.
Use the up and down buttons on the left hand side of the unit until ‘Change Screen Colour’ is displayed and then press the ‘OK’
button. Finally select either ‘Black’ or ‘White’.
3. Screen themes – Display face
My-Speed has two different themes to choose from. As standard My-Speed will display a green ‘smiley’ face if you are travelling above
the speed limit or a red ‘sad’ face if you are travelling above the speed limit. If you do not want these icons to be displayed enter the
menu and scroll through until you see ‘Display face’ and press the ‘OK’ button. Select ‘Off’ and then the ‘OK’ button to confirm your
selection.
4. Adjusting the Volume
Use the up and down buttons on the left hand side of the unit to adjust the volume.
5. ‘P’ User point button
My-Speed enables you to save a number of your own ‘user points’ within in it’s memory. If you save a ‘User point’ My-Speed will
alert you to that position every time you drive past it. To save a ‘User point’ press and hold the ‘P’ button on the front of the unit for 2
seconds. To edit or delete any ‘User points’ you have saved, enter the menu and scroll until ‘User points’ is displayed and press the ‘OK’
button. Next select ‘Edit name’, ‘Delete’ or ‘Delete All’
6. Muting an alert.
If during an alert you decide that you would like to mute the audible alert, but still retain a visual alert simply press the MUTE button.
The screen will continue to display a visual alert but no audible alert will be produced. After you have travelled out of range of that
location the unit will automatically reset so that the next time you encounter a fixed speed camera location you will receive both an
audible and a visual alert as normal.
7. Cancelling an Alert
If during an alert you decide that you would like to cancel it simply press and hold either the MEM or MUTE buttons. The display will
confirm that the alert has been cancelled and will return to the standby screen.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Snooper MySpeed Aura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Snooper MySpeed Aura in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info