16855

Sharp UX510 Manual

58
Zoom out
Zoom in
Previous page
1/114
Next page
4
If you still do not hear a fax tone, turn off the Quiet Detect
Time function and have callers send faxes by pressing "5",
"*", "*" and then their Start key. For more information on
this method, see "If it still doesn’t work" in this chapter.
If you have problems
If you have problems with the hookup, first check the following:
♦ Is the answering machine connected properly to the fax? One end of the an-
swering machine line should be inserted in the "TEL. SET" jack on the
fax, and the other end in the answering machine’s telephone line jack.
♦ Have you set Option Setting 9, TAD CONNECTED, to YES on your fax as
described on the second page of this chapter, and is the reception mode set
to AUTO?
If the above settings and connections are correct and the hookup still doesn’t op-
erate properly, the operation of the fax and the answering machine are probably
not synchronized well. Some common problems and their solutions are de-
scribed below.
♦ Are callers who want to leave a voice message being interrupted by the fax
before they can do so?
The fax is set to take over the line and begin reception if it detects a set duration
of silence (called "Quiet Detect Time"). If your outgoing message contains a
pause or the caller pauses while leaving a message, and the pause is longer than
the set duration, the fax will interrupt.
It is best to shorten or eliminate such pauses, but if necessary you can also try
lengthening the Quiet Detect Time setting. This procedure is described in "Op-
tional Hook-up Settings" at the end of this chapter.
♦ Are callers who want to send a fax manually having trouble doing so after
your answering machine’s outgoing message plays?
If so, the answering machine may be disconnecting the line (hanging up) before
your fax has a chance to take over the line and begin reception. You can make
your fax activate sooner by shortening the Quiet Detect Time setting. This proce-
dure is described in "Optional Hook-up Settings" at the end of this chapter.
Chapter 7 Answering Machine Hookup
48
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UX510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX510 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info