Manual Sharp UX510 (page 59 of 114) (English)

16855

Zoom out

Zoom in

1/114

<P=005>

♦ Are you having trouble receiving documents sent by automatic dialing?

Make sure that your answering machine’s outgoing message is less than 10 sec-

onds long, and that your answering machine is set to answer on two rings. Insert-

ing a short pause (about four seconds) at the beginning of your answering

machine’s outgoing message might also help, as this gives your fax a chance to

clearly hear and detect the fax "calling" tone which the transmitting machine

sends in the case of automatic dialing.

♦ Is the fax interrupting voice calls taken on an extension phone?

When Option Setting 9 (TAD CONNECTED) is set to YES and the reception

mode is set to AUTO, the fax may interrupt voice calls received on an extension

phone. If you want to use the answering machine hookup while you are in to

monitor incoming calls, you can prevent fax interruption of voice calls by press-

ing any 3 keys on the extension phone after answering. (Note: Do not press "5",

"*", and "*, the code to activate fax reception.)

♦ Is the fax interrupting when you enter your answering machine’s code to re-

trieve voice messages from an outside telephone?

Make sure your answering machine’s remote retrieve code is different from the

code used to activate fax reception with an extension telephone ("5", "*", and

"*"). If they are the same, entering the remote retrieve code will activate the fax

machine.

If it still doesn’t work

With certain answering machines, it may not be possible to find a Quiet Detect

Time setting which will allow both fax reception and uninterrupted voice mes-

sage recording. In this case, callers on tone dial lines can still send faxes by

pressing "5", "*", and "*" on their fax. This is the code for activating fax recep-

tion (the code can be changed by changing Option Setting 5).

To use this method, set Quiet Detect Time to "00" to turn it off (see "Quiet De-

tect Time" in "Optional Hookup Settings" in this chapter), and then change your

outgoing message to inform callers that they can send a fax by pressing "5",

"*", "*", and then their Start key. Your message might go as follows:

"Hello. You’ve reached the ABC company. No one is available to take your call

right now. After the beep, please leave a message, or, if you want to send a fax,

press ’five’ once, ’asterisk’ twice, and then your facsimile Start key."

Chapter 7 Answering Machine Hookup

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX510 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp UX510 Manual

Product: