16855
56
Zoom out
Zoom in
Previous page
1/114
Next page
Activating the hookup
Before you go out, activate the answering machine hookup as follows:
1
Set Option Setting 9, TAD CON-
NECTED, to YES:
Press the FUNCTION key and then
the "4" key. OPTION SETTING will
appear in the display.
Press the "#" key nine times.
TAD CONNECTED will appear in the
display.
Press "1" to select YES. (To deactivate
the hookup, press "2" for NO.)
Press the STOP key to return to the
date and time display.
2
Set the reception mode of your fax to
AUTO by pressing the RECEPTION
MODE key.
Important: For the hook-up to operate
properly, the reception mode of your
fax must be set to AUTO.
3
Set your answering machine to auto answer. It must answer on
no more than two rings (if not, you may not be able to receive
faxes sent by automatic dialing).
If your answering machine has a toll saver function, make sure that it will
answer by the fourth ring.
4
When you return and turn off your answering machine, you
must set TAD CONNECTED to NO (see Step 1 above) if you
will be using your fax in AUTO reception mode. If you will
only be using MANUAL reception mode, you can leave TAD
CONNECTED set to YES.
Note: The call counter on your answering machine may indicate that voice
messages were received, when only fax messages were received.
RECEPTION
MODE
STOP
FUNCTION
4
1
Chapter 7 Answering Machine Hookup
46
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UX510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX510 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info