699577
21
Zoom out
Zoom in
Previous page
1/24
Next page
CA-10 SATEL
19
After calling the function, the control panel generates two short beeps and waits for the
output number key (1-6) to be pressed. The control consists in changing over the status
of the given output to its opposite, i.e. the inactive output gets activated and vice versa.
Provision is made for multiple control of the same output or control of different outputs
of the SWITCH BI type after single calling of the function. Activation of the output is
confirmed by four short and one long beeps, and its deactivation - with three short
beeps. Refusal of control is signaled with two long beeps. The control panel may refuse
control, if the output is not of the SWITCH BI type or if it belongs to another partition.
Pressing the keys [#] or [
*
] will end the function. The control panel will automatically
terminate the function if none of the outputs is of the SWITCH BI type, or if no key on
the keypad is depressed for 40 seconds.
The function is accessible to the master user, as well as to the users with authority
levels 1 and 6.
Power supply reset [CODE][
*
][9]
This function is used to operate special detectors equipped with individual on/off
memory which is cleared by powering down the system (e.g., smoke detectors, broken
glass detectors). The function temporarily disconnects power supply to such detectors
(on „RESET power supply” outputs).
The function is available to the master user and users with authority level 1.
Telephone DOWNLOADING start [CODE][
*
][0]
This function can be activated by the master user and the users with authority level 1. It
starts the control panel - service PC telephone connection. The function enables the
panel - PC telephone communication, when the possibility to initiate connection from the
PC computer is blocked.
On activating the function the panel engages the telephone line and connects to the
service computer. If the panel fails to establish connection, it will make four more
attempts to get through. During the data exchange the telephone line will be busy. The
service can temporarily suspend the connection to free the telephone line and, after
some time, call back the panel to continue data exchange. The installer should make
users aware of the procedure so that they do not answer the incoming calls and allow
re-establishing and correct completion of the transmission.
Viewing events log
(additional function in the LCD keypad)
On activating the function, the users can view the memory log in which all the events
are recorded in detail. The ▲▼ keys enable scrolling through the list of events, and the
◄► keys make it possible to get extra information: zone descriptions, partition and user
names.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info