699577
1
Zoom out
Zoom in
Previous page
1/2
Next page
MST-1
MODULE DTMF
®
Program Version 1.1
mst1_en 08/08
The module DTMF MST-1 is an electronic device that enables the control of an alarm system control
panel by a telephone set that is equipped with the tone dialling mode (DTMF). It allows to check the
status of an alarm system and control panel’s zones and to perform certain user functions. It can interfa-
ce with the CA-6 plus (software version 3.04, 4.00 or later) and CA-10 control panels (from the software
version 4.2).
CONNECTION DESCRIPTION
Figure: Module board
The module may be installed in the control panel housing.
Plug the connector with cable to the voice synthesiser socket on the control panel’s board. If a voice
synthesiser has been already connected to that socket it should be unplugged and reconnected to the
identical socket on the module’s board.
Two leads DATA and CLK (without connector) are to be used for the connection of the module with
keypads’ buses. Names of the leads indicate the terminals on the control panel’s board, to which they
need to be connected. In the CA-10 plus control panel the lead CLK is to be connected to the terminal
CLK1 that relates to the first partition.
ACTIVATION
Co-operation of the module with the control panel requires activation of the options by means of service
functions.
1. FS 5 option 3 in the first set - ”Telephone answering”.
2. For CA-6 plus: FS 131 option 4 - ”DTMF module operation enabled”.
For CA-10 plus: FS 131 option 2 - ”DTMF module operation enabled”.
The method of answering telephone is defined in an identical way as for other dialler’s functions (single
or double calling, number of rings).
FUNCTIONS
The remote control can be effected from a telephone the control panel calls up during voice messaging
(immediately after the message from speech synthesizer is reproduced), or after getting through from
any telephone set (NOTE! The CA-10 plus v4.2 performs control only when the connection is initialized
from an external telephone set). Having received the call, the module reports its readiness with two
beeps (high-pitched and low-pitched) when it works with the CA-6 plus, or with three beeps (high-
pitched, low-pitched and high-pitched) when it works with the CA-10 plus control panel.
It is possible to perform operations of two types:
1. Checking the status of zones or partitions.
2. Performing a user function.
(view of the connector
from the side of holes)
FOR THE KEYPAD BUS
THE SOCKET FOR THE
VOICE SYNTHESIZER SM-2
CONNECTOR TO THE
SOCKET OF THE VOICE
SYNYHESIZER SM-2 ON THE
CONTROL PANEL’S BOARD
DATA
CLK
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info