699577
2
Zoom out
Zoom in
Previous page
1/2
Next page
The below table presents the functions performed by the MST-1 module:
CODE DESCRIPTION
[0][#] End of connection with the control panel
[1][#] Checking the status of partition 1
[2][#] Checking the status of partition 2
[3][#] Checking the status of partition 3 (it relates to the CA-10 plus control panel)
[4][#] Checking the status of partition 4 (it relates to the CA-10 plus control panel)
[9][#] Checking zones status
[CODE][#] Arming/disarming, alarm clearing
[CODE][¼][4] Zones bypass
[CODE][¼][5] Silent arming
[CODE][¼][7] Controlling of the output of ”MONO switch” type
[CODE][¼][8] Controlling of the output of ”BI switch” type
The control is performed using DTMF signals of the telephone keyboard. To call the selected function
press sequentially telephone keys in accordance with the calling method as shown in the table.
Partition status signalling:
three short beeps – partition disarmed;
four short and one long beeps - partition armed.
Alarm in a partition or memory of an alarm are signalled with a series of short beeps (changing from
high to low) that last approx. 2,5 seconds directly after signals informing on partition status.
The function ”Checking zone status” can readout the information, which of keypad’s LEDs shine with a
steady light and which of them are blinking. During co-operation with CA-10 control panel the module
informs in accordance with the settings of service functions FS 12 do FS 15.
The indication of a zone of an armed partition means memory of an alarm triggered by this zone, while
the indication of a zone of a disarmed partition means violation of the zone. In the CA-6 control panel
the number of a diode relates to the number of a zone, while in the CA-10 plus control panel the installer
himself defines the numbers of zones to be indicated by LEDs of the keypad assigned to the partition
(such keypad needs to be connected to the control panel). It is possible to check the status of LEDs
numbered from 1 to 12.
The method of checking the zone status
:
After the first calling of the function [9][#], the module generates short beeps, the number of which is
equal to the lowest number of a shining LED. If none of LEDs shines, the module generates two
long beeps.
The subsequent calling of the function [9][#] indicates the next LED, which is shining. The review
needs to be continued till hearing two long signals informing that there are no more LEDs shining.
The repeated calling the function (after two long signals) will restart the review of zone status.
In order to check the zones status in the control panel CA-10 plus, first it is necessary to check the
status of one of zones through calling an appropriate function: ([1][#]; [2][#]; [3][#] or [4][#]), and
afterwards to check the status of its zones with the function [9][#]. Each of zones needs to be called
separately.
User functions, protected with a code, are performed in an identical way as during using the control
panel’s keypad (see description in the user manual). Acoustic signalling is identical with signalling of the
keypad. To go into the mode of control of other partitions in CA-10 plus press [1][#]; [2][#]; [3][#] or
[4][#].
The performance of the remaining user functions
, functions of ”hold down” type, partitions quick arming
and entering the service mode through the MST-1 module is blocked
.
The function [0][#] breaks the phone connection. Similarly the control panel finishes the connection if for
30 seconds it doesn’t receive any DTMF signal from a telephone set.
SATEL sp. z o.o.
ul. Schuberta 79
80-
172 Gdańsk
POLAND
tel. (+48 58) 320 94 00
info@satel.pl
www.satel.pl
Latest EC declaration of conformity
and product approval certificates can
be downloaded from our Web site
www.satel.pl
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info