699577
1
Zoom out
Zoom in
Previous page
1/2
Next page
high position - 1
low position
- 0
Figure 2.Jumpers setting
®
CA-10E
ZONE EXPANDER
ca10e_en 08/08
The CA-10E zone expander is designed to work together with the CA-10 alarm control panel.
It allows extension of the alarm system by 6 zones without additional keypads.
Description
Description of terminals:
Z1 to Z6 – zones,
COM – common (0V),
TMP – input of expander tamper circuit (NC) – if not used, connect to a COM terminal
DATA, CLK – communication with control panel,
AUX – power supply (+12V).
The jumpers A B C D are used to set the expander's address
(high jumper position – 1, low jumper position – 0). The
expander address must be programmed in the control
panel (FS111 or FS124) as the address of every keypad
replaced by expander.
The jumpers C1 and C2 allow the system to work in any
configuration (1 keypad + 6 expansion zones, 2 keypads + 4
expansion zones, 3 keypads + 2 expansion zones). Jumpers
C1 and C2 are used to bypass sending information about
zones Z3 and Z4 (C1), Z5 and Z6 (C2). Jumpers must be set
in high or low position – they can not be taken off permanently.
Z1 COM Z2 Z3 COM Z4 Z5 COM Z6
A B C D C1 C2
COM TMP CLK DATA AUX AUX
CONTROL
PANEL
CA-10
+KPD
DATA
CLK
COM
LED
Figure 1. Connection of zones expander to control panel
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 User Manual - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info