699577
20
Zoom out
Zoom in
Previous page
1/24
Next page
USER MANUAL CA-10
18
Silent arming [CODE][
*
][5]
In the silent armed mode the alarms are only signaled in keypads and reported to the
monitoring station. The installer decides if the silent armed mode is to be active in the
entire protected facility or if a selected area will remain disarmed.
The function is not available to the users with authority levels 5, 6, 0.
Time setting [CODE][
*
][6]
The function enables setting the panel’s clock.
In the LED keypad the programming procedure is as follows:
- HOURS, MINUTES - acceptance ([H][H][M][M][#]),
- DAY, MONTH - acceptance ([D][D][M][M][#]),
- YEAR - acceptance ([R][R][R][R][#]).
It is possible to quit the function already after programming either time or date by
pressing the [#] key twice.
In the LCD keypad the programmable parameters (time, data, year) can be edited with
additional keys: and keys position the cursor, key deletes the character before
the cursor, key switches data entry mode (insert/type over).
The function is only available to the master user and users with authority level 1.
MONO switch outputs activate [CODE][
*
][7]
The purpose of the function will be determined by the installer. It can activate e.g.
electric locks, bells, signal lamps, or any other devices.
After calling the function, the control panel generates two short beeps and waits for the
output number key (1-6) to be pressed. The control consists in activating the given
output for a period of time programmed in the control panel. Provision is made for
multiple control of the same output or control of different outputs of the MONO switch
type after single calling of the function. Correct performance of the control is confirmed
by four short and one long beeps, and refusal of the control - by two long beeps. The
control panel may refuse control, if the output is not of the SWITCH MONO type or if it
belongs to another partition. Pressing the key [#] or [
*
] will end the function. The control
panel will automatically end the function if none of the outputs is of the SWITCH MONO
type, or if no key on the keypad is depressed for 40 seconds.
The function is accessible to the master user, as well as to the users with authority
levels 1 and 5.
EXAMPLE: successive control of the outputs 4, 5, 4 (master code=1234)
[1234] [
*
] - calling the "user function" mode by the MASTER user
[7] - calling the function of "MONO switch outputs activate" (two short beeps)
[4] - monostable triggering of the output 4 confirmed by four short and one long
beeps
[5] - monostable triggering of the output 5 confirmed by four short and one long
beeps
[4] - monostable retriggering of the output 4 (four short and one long beeps)
[#] - end of the function (four short and one long beeps)
BI switch outputs activate [CODE][
*
][8]
The purpose of the function will be determined by the installer. It can be used e.g. for
switching on external lighting or any electrical equipment.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-10 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-10

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 User Manual - English - 2 pages

Satel CA-10 Additional guide - English - 60 pages

Satel CA-10 Additional guide - English - 24 pages

Satel CA-10 Quick start guide - English - 11 pages

Satel CA-10 Installation Guide - English - 43 pages

Satel CA-10 User Manual - German - 2 pages

Satel CA-10 User Manual - German - 4 pages

Satel CA-10 Additional guide - German - 64 pages

Satel CA-10 Additional guide - German - 24 pages

Satel CA-10 User Manual - German - 26 pages

Satel CA-10 Installation Guide - German - 44 pages

Satel CA-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info