459410
116
Zoom out
Zoom in
Previous page
1/204
Next page
Troubleshooting
104
5
Self checking...
appears.
The machine is preforming
image adjustment opera-
tions.
The machine may perform periodic
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
The original images are
printed on the reverse side
of the paper.
You may have loaded the
paper incorrectly.
Load paper into the large capacity
tray (LCT) and a bypass tray with
the print side up, or into a paper
tray with the print side down. See
p.107 B Loading Paper.
Misfeeds occur frequently. The side guides of the pa-
per tray may not be locked
or may not be set properly.
Check the side guides are locked
and set properly. See p.126 Chang-
ing the Paper Size.
The end guide of the paper
tray may not be locked.
Check that the end guide is locked.
See p.126 Changing the Paper
Size.
You may have loaded pa-
per whose size cannot be
detected automatically.
When you use paper of a size that
cannot be detected automatically,
set the paper size. See p.60 Tray Pa-
per Size: (Tray 2-3), p.178 Copy
Paper.
The saddle stitching staple
cartridge for the Finisher
MEC BK (Saddle Stitch)
has been removed.
Reset the saddle stitching staple car-
tridge. See p.128 d Adding Sta-
ples.
The specified paper size
differs from the actual size
of the paper loaded in the
paper tray.
Press the {
{{
{Clear/Stop}
}}
} key. When
copying stops, select the appropri-
ate paper type with User Tools, or
use the appropriate paper.
An error message remains,
even after the misfed paper
is removed.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
Clear misfed paper and open and
close the front cover. p.116 x
Clearing Misfeeds
Cannot duplex print You cannot use the paper
in the bypass tray for du-
plex printing.
For duplex printing, select Tray 1-3
in Copier mode or with the printer
driver.
The setting for the Paper
Type: Tray 1-3 is 1 Sided
Copy.
Select 2 Sided Copy for Paper
Type: Tray 1-3. See p.61 Paper
Type: (Tray 1-3, LCT).
During saddle stitching,
paper comes out open and
not neatly stacked.
Depending on the type of
paper, the paper may
spring open after it is fold-
ed.
Select a paper type that does not
spring back easily .
The user code entry dis-
play appears.
Users are restricted by user
codes.
Enter the user code (up to 8-digits),
and then press [#].
Machine Status Problem/Cause Action
VenusC1_EN_zen_Pre_FM.book Page 104 Monday, April 18, 2005 4:49 PM
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh SDC 555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh SDC 555 in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info