628910

Multiplex Power Peak D7 EQ-BID - 30 8129 Manual

28
Zoom out
Zoom in
Previous page
1/92
Next page
Operating Instructions
Power Peak
®
D7 EQ-BID
Order No.
8129
13
14.2 EQUALIZER DISPLAY
When a Lithium battery is being charged or discharged, the screen
of the Power Peak
®
D7 EQ-BID can display the voltage of the indi-
vidual cells: press the "START / ENT." button during the process
(charge, discharge). It is absolutely essential to connect the Lithium
batterytothechargerusingtheVoltageSensorlead.
This screen display provides an overview of the state of balance of
the battery as a whole. The lower illustration shows the display for
a three-cell pack; the individual battery cells are well balanced: the
voltagedifferenceis20mV.
The top line (Output:) shows the total battery voltage.
The next line down shows the minimum and maximum cell voltages
in the pack.
This is followed by a display of the individual cell voltages with a
resolutionof10mV.
This type of display provides a fast and very accurate overview of
the voltage of the individual cells.
Pressing the "START / ENT." button again calls up the graphic
display.
Graphic display:
(DataView)
Main :11.39V
Max:3.81V
Min:3.79V
3.79V3.79V3.81V
0.00V0.00V0.00V
0.00V
15. SCREEN DISPLAYS AFTER A PROCESS
The end of a charge / discharge process is indicated by the on-
screen message "End: XXXX"; you will also hear a melody. The
screennowdisplaysalltheimportantdatafortheprocessjust
completed. Holding the "STOP / ESC" button pressed in for at least
two seconds resets the messages, and the main menu reappears.
15.1 TEXT DISPLAYS
The screen displays the current settings. As well as showing the
completed process in the first line, the second line shows the
reason for the cut-off as a flashing item. At the same time and
according to the programming and battery type, the following will
be displayed as flashing items.
•End:Charge
•End:Automatic
•End:Fastcharge
•End:Discharge
•End:Storage
•End:Re-peak
•End:Cycle
•End:Balance
NOTE:
Asalreadymentioned,thedisplayadjustsitselftothebatterytype
and the selected cut-off method. Since it is not possible to show
all the displays, it is necessary to analyse and interpret the text
which appears.
16. PROGRAMMING A BID CHIP OR KEY
As soon as a BID chip or key is connected to the charger, the
charger switches to BID mode for displaying or programming the
BID chip or key. If the beeper is active, you will hear a brief beep
at this point. The same applies if the charger is switched on with
a BID chip or key already connected. The picture below shows
this situation.
The screen displays the following data, which can be program-
med:
1st line: date (01/01/2014): here you can store the date for the first
time you use the battery.
2nd line: battery type, cell count, capacity, programmable.
3rd and 4th lines: charge current, discharge current, user-variable.
5thline:TVCvoltage:thiscanbechangedtemporarily,butcannot
be stored on the BID.
The BID chip / key is programmed using the method described for
the"Memoryname"menuonpage8.
Once you have entered the battery date, the values must be
BID EDIT (01/01/2000)
LiPo7.4V2000mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :3.2V/C
TVCVolt :4.20V
Save to BID
v (voltage curve)
11.46V 00:01:38
DurationActual voltage
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Power Peak D7 EQ-BID - 30 8129 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Power Peak D7 EQ-BID - 30 8129 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info