Manual Multiplex Power Peak D7 EQ-BID - 30 8129 (page 30 of 92) (English, German, French, Italian, Spanish)

628910

Zoom out

Zoom in

1/92

Operating Instructions

Power Peak

D7 EQ-BID

Order No.

8129

22. DISPOSAL OF USED EQUIPMENT

Electronic equipment must not simply be discarded

in the normal domestic waste. That is the meaning

of the symbol shown here, which you will find on

the Power Peak® D7 EQ-BID. This symbol means

that you should dispose of electrical and electronic

equipment separately from the household waste at

the end of its useful life. Please take your unwanted

device to your local communal collection point of recycling centre.

This requirement applies to member countries of the European

Union as well as other European countries with a separate waste

collection system.

[ Error ]

BID interruption!

* The BID system was con-

nected while a process was

active.

[ Error ]

BID incompatible

* Invalid data on the BID

chip or key.

(possibly LiPo cell count

greater than seven cells)

20. GUARANTEE

Naturally all our products are guaranteed for 24 months as requi-

redbylaw.Ifyouwishtomakeajustifiedclaimunderguarantee,

please contact your dealer in the first instance, as he is respon-

sible for the guarantee and for processing guarantee claims.

During the guarantee period we will rectify any functional defects,

production faults or material flaws at no cost to you. We will not

accept any further claims, e.g. for consequential damage.

Goods must be sent to us carriage-paid; we will pay return carri-

age costs. We will not accept any packages sent without pre-paid

postage.

We accept no liability for transport damage, nor for the loss of your

shipment. We recommend that you take out appropriate insurance.

Send your device to the approved Service Centre in your country.

The following requirements must be fulfilled before we can

process your guarantee claim:

• Youmustincludeproofofpurchase(tillreceipt)withtheretur-

ned product.

• You must have operatedthe productin accordancewith the

operating instructions.

• Youmusthaveusedrecommendedpowersourcesandgenui-

ne robbe accessories exclusively.

• Theremustbenodamagepresentcausedbymoisture,unau-

thorised intervention, reversed polarity, overloading or mecha-

nical stress.

• Pleaseincludea concise, accurate descriptionofthe fault to

help us locate the problem.

21. LIABILITY EXCLUSION

[ Error ]

BID error

* The BID system has been

connected or

disconnected.

23. CONFORMITY DECLARATION

robbe Modellsport GmbH & Co. KG hereby declares that this

device conforms to the fundamental requirements and other rele-

vant regulations of the corresponding EC Directives. You can

read the original Conformity Declaration on the Internet at www.

robbe.com: click on the "Conformity Declaration" logo button which

you will find next to the corresponding device description.

[ Error ]

Internal temperature

* The internal temperature is

excessive. Allow the charger to

cool down.

Errors and technical modifications reserved.

Duplication and copying of the text, in whole or in

part, is only permitted with the prior

written approval of robbe-Modellsport GmbH & Co.

MULTIPLEX Modellsport GmbH & Co.KG

Westliche Gewerbestr. 1

D-75015 Bretten (Gölshausen)

phone: 0049 7252 580 93 0

This battery charger is designed and approved solely for the

purpose of charging the batteries defined in the operating

instructions. MULTIPLEX Modellsport accepts no liability

whatsoever if the charger has been used for any purpose other

than the intended one.

MULTIPLEX Modellsport is unable to ensure that you observe the

assembly and operating instructions, or the conditions and methods

employed for installing, operating and maintaining the radio control

system components.For this reason we accept no liability for loss,

damage or costs which are due to the erroneous use and operation

of our products, or are connected with such operation in any

way.Regardless of the legal argument employed, our obligation to

pay compensation is limited to the invoice value of those

MULTIPLEX products directly involved in the event in which the

damage occurred, unless otherwise prescribed by law. This does

not apply if the company is deemed to have unlimited liability

according to statu-tory regulation due to deliberate or gross

negligence.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Power Peak D7 EQ-BID - 30 8129 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex Power Peak D7 EQ-BID - 30 8129 Manual

Product: