555054
3
Zoom out
Zoom in
Previous page
1/34
Next page
Contents:
1. Before starting 4
2. Control panel installation 4
2.1. Opening of the control panel 4
2.2. Attaching the control panel to the wall 4
2.3. Antenna installation 4
2.4. Connection of the AC adapter 4
2.5 Connection of the telephone line 5
2.6. Back up battery installation 5
2.7. Powering of the control panel 5
3. Installation of detectors 5
3.1. JA-60N - magnetic door detector installation 5
3.2. JA-60P - motion detector installation 6
4. Enrollment of detectors and remote controls 7
4.1. Procedure for enrolling detectors and controllers 7
4.2. Enrollment or deletion of a detector or controller to/from a desired position (zone) 7
5. Testing of detectors and controllers 8
5.1. JA-60N magnetic door detector testing 8
5.2. JA-60P motion detector testing 8
5.3. Remote control and keypad testing 8
5.4. Recording a detector's location 9
6. Finishing of the installation 9
6.1. Specifications 9
7. Wiring of external devices 10
7.1. Terminals in the control panel 10
7.2. Use of external sensors with the JA-60N 11
8. Control panel programming 11
8.1. Testing of the system 12
8.2. Enrollment (teaching) of wireless items 13
8.3. Exit delay 13
8.4. Entrance delay 13
8.5. Alarm duration 13
8.6. PgX and PgY outputs function 13
8.7. User recorded message and phone numbers editing in the user mode 14
8.8. Radio signal jamming testing 14
8.9. Regular communication checking 14
8.10. Reset enabled 14
8.11. Enrollment of the control panel to a UC-216, 222, JA-60K etc. 15
8.12 No code requested for F1, F2, F3, F4, F8 & F9 15
8.13. Partial arming with F2 (not split system) 15
8.14. Siren alarm 15
8.15. Exit delay audible indication 16
8.16. Partial arming exit delay audible indication 16
8.17. Entrance delay audible indication 16
8.18. Arming and disarming chirp sounds 16
8.19. Siren alarm in Disarm & Split arming or disarming 16
8.20. Wireless siren alarm 17
8.21. Indication of system problems when arming 17
8.22. Control panel splitting 17
8.23. Addressing of detectors to sections 17
8.24. Addressing of the user codes to sections 17
8.25. Addressing of wireless controllers to sections 18
8.26. Automatic arming / disarming setting 18
8.27. Real time and date setting 18
8.28. New service code setting 19
8.29.
User Mode entering 19
9. Voice & Pager messages setting 20
9.1. Telephone numbers entering 20
9.2. Voice message recording 21
9.3. Telephone dialer testing 21
9.4. Dialing method 21
9.5. Telephone dialer triggering* 22
9.6. Telephone line checking 22
10. To enable a remote computer to dial in 23
10.1. Reaction to an incoming call 23
10.2. Remote access code setting 23
11. Factory default RESET 23
12. Monitoring station communication setting 24
12.1. Reporting code setting 24
12.2. Account code setting 25
12.3 Protocol and Format setting 25
12.4. Re-dialing pause setting 25
12.5. Phone number entering 26
12.6. Digital communicator reset 26
13. Monitoring station reporting codes table 27
13.1. Internal structure of Contact ID protocol 28
14. Personal Computer Interface with JA-60 29
15. Remote access to the system 29
16. Recommended Professional installer basic rules 30
17. Trouble shooting table 30
18. Possibilities to extend the system 31
18.1 Extension of the system with a subsystem 31
19. Overview of the JA-60 parts 32
This manual is valid for control panel model JA-60KX, SW versions FM61215 (control panel board) and DY61232 (telephone communicator board).
The use of Comlink Windows v. 58 software or higher is required with this control panel, and can be obtained from our home page at
WWW.JABLOTRON.CZ
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60

Jablotron JA-60 Additional guide - English - 1 pages

Jablotron JA-60 User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info