The machine started bunching all the cotton on the underside of the material and would not progress. In the manual it suggests that lint might have collected, it had, so I cleaned this out thoroughly. I read troubleshooting in the manual and it mentioned the position of the feed teeth and the lever to the back and below the free arm bed, I slid this across and the teeth dropped but would not rise when I slid it back to the "raise feed teeth" position. It had no effect so now cannot use the machine. Can one repair this, if so, how? Thank you.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

• First, read the manual;
• Check if your question has been asked previously;
• Try to ask your question as clearly as possible;
• Did you already try to solve the problem? Please mention this;
• Is your problem solved by a visitor then let him/her know in this forum;
• To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
• Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Post your question in this forum.

Info