Husqvarna Huskystar 224

Language Type Pages
English User Manual 56 > Go to the manual
518064

Do you have a question about this product? Post your question here in this forum.

Forumrules
1

Forum

husqvarna-huskystar-224

Reset search

  • How do I set my machine to zigzag
    My machine only makes small stitches even when I change the length Submitted on 5-3-2022 at 21:36

    Reply Report abuse

  • I can not replace a new needle. Difficult to find entrance Submitted on 19-2-2022 at 22:45

    Reply Report abuse

  • The machine started bunching all the cotton on the underside of the material and would not progress. In the manual it suggests that lint might have collected, it had, so I cleaned this out thoroughly. I read troubleshooting in the manual and it mentioned the position of the feed teeth and the lever to the back and below the free arm bed, I slid this across and the teeth dropped but would not rise when I slid it back to the "raise feed teeth" position. It had no effect so now cannot use the machine. Can one repair this, if so, how? Thank you. Submitted on 8-12-2021 at 13:25

    Reply Report abuse

  • the reverse is not working, am i missing a setting?
    Submitted on 20-4-2020 at 06:58

    Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product: Husqvarna Huskystar 224

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

  • First, read the manual;
  • Check if your question has been asked previously;
  • Try to ask your question as clearly as possible;
  • Did you already try to solve the problem? Please mention this;
  • Is your problem solved by a visitor then let him/her know in this forum;
  • To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
  • Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Your question has been posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info