571659
4
Zoom out
Zoom in
Previous page
1/10
Next page
GOSSEN Foto- und Lichtmesstechnik GmbH 4
3.2 Measuring functions – Ambient light measurement
Select the required ambient light function with the corresponding function buttons.
Shutter priority in function t: a reading is taken for the corresponding aperture
(see Section 3.2.3 Shutter priority mode – Ambient light measurement, page 4)
Contrast measurement in function t: (see Section 3.2.4 Contrast measurement, page 4)
Aperture priority in function f: a reading is taken for the corresponding shutter speed
(see Section 3.2.5 Aperture priority mode, page 5)
Exposure value measurement in function EV: preselect the shutter speed and the
aperture is given as an analog value (see Section 3.2.6 Exposure value EV, page 5)
CINE (frames per second) in function t:
(see Section 3.2.7 CINE scale (frames per second), page 5)
.
3.2.1 Flash readings
Readings can be taken with or without synchronizing cable. When used in
conjunction with a synchronizing cable the flash is triggered by
pressing the M button–the flash is automatically triggered and measured.
Select with the function buttons
Adjust the desired synchronizing speed with the value buttons.
Synch range from 1 s to 1/1000 s (including 1/90 s)
Press the measuring button M.
Digipro F is operable for metering for a period of 45 s (meter
readiness prevails as long as F remains visible in the display)
Trigger the flash
The measured aperture (total of flash and ambient light) appears
in the left digital display, and as a flashing mark on the analog aperture scale. The aperture for the share of
ambient light is additionally indicated on the aperture scale (in our example f/8).
3.2.2 Multiple flash
Occasionally the light output from a single flash may not be sufficient to
enable you to work at the aperture desired. In that case, simply
push the top value button until the desired f/number appears in the
display. The digital display of the time t disappears and the number of
flashes required is indicated (e.g.: F4 = 4 flashes).
The Digipro F will calculate up to a maximum of 10 flash sequences.
3.2.3 Shutter priority mode – Ambient light measurement
Select with the function buttons (the last stored value appears
on the display)
Adjust the desired shutter speed with the value buttons
Measure by pressing the meas. button M
The measured aperture appears in the left-hand digital display
(accuracy: 1/10 stops), also as a rounded mark in the analog aperture scale
Select alternative aperture/shutter speed combinations with the value buttons.
3.2.4 Contrast measurement
Select t with the function buttons
Keep the measuring button M pressed
while aiming the meter at various areas of the subject. The analog
aperture scale displays the f-stop series between the two extreme
values and with the actual measured value flashing. The first
measured f-stop is displayed in the left-hand side of the display. It remains displayed as a reference value
(e.g. of a grey card)).
After the measuring button is released, the entire measured contrast range is displayed on the analog aperture
scale, and the last measured value will cease to flash.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Digipro F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Digipro F in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Digipro F

Gossen Digipro F User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info