571659
6
Zoom out
Zoom in
Previous page
1/10
Next page
GOSSEN Foto- und Lichtmesstechnik GmbH 6
3.4 Setting and measuring correction values
(see Section 3.4.4 Important remarks concerning correction values, page 6)
3.4.1 Setting correction values
Select COR with the function buttons (the last valid correction
value appears in the display)
Enter or change the correction value with the value buttons
The extension factor is shown in the right-hand digital display,
and the correction value in stops in the left-hand section.
Enter in 1/10th stops (small figure) within a range of ±7.9 exposure values.
A figure preceded by „“ indicates an exposure extending correction.
Example: –3.1 stops equal factor 8.6.
In the event of an exposure shortening correction, only the left-hand display appears as an exposure value difference
in stops.
3.4.2 Measuring correction values
Correction values can also be directly measured. An evenly illuminated
surface and constant light level are required. Measure in the reflected mode.
Press measuring button M and get a reference reading:
displayed as rF--
Weaken light by holding e.g. a grey filter in front of the measuring
aparture. Press meassuring button M
The light reducing factor will be diplayed automatically in stops
at the right, as extension factor at the left.
Pressing one of the function buttons will transfer the correction value
to the memory of the Digipro F. The COR value is now automatically
taken into account in all subsequent measuring functions. The frame
around COR is retained as a reminder that a correction value was
entered.
3.4.3 Cancelling correction values
Select COR with the function buttons
Press measuring button (display rF --)
Select any other function with one of the function buttons.
Correction value is cancelled, and the frame around COR
disappears.
3.4.4 Important remarks concerning correction values
The Digipro F is a precision meter calibrated with great accuracy to provide exact exposure data. Should you still not
be satisfied with the results, then you should remember that there are independent variables that can influence the
success of your exposures.
For instance:
the „true“ speed of your film can deviate from that on the pack
the „true“ shutter speeds and f-stops of your camera can differ slightly form the rated values
Deviations can arise when the film is processed.
Also there must be added purely subjective factors and matters of personal preference in the assessment of the
finished photos. However, you can calibrate your Digipto F to characteristics of your camera, your brand of film, your
processing methods, and to your projector.
We recommend the following procedure:
Take the readings of a few normal subjects with the utmost care by the reflected and incident light measuring
methods, and take five shots of each subject on colour reversal film. The first picture should be exposed with the
exposure settings supplied by the Digipro F. The exposure settings for the remaining shots are then increased and
decreased, respectively, by half an f-stop and then a full
f-stop. Make a note of the shooting conditions. These must not change while the five shots are being taken. Now
select from the processed pictures the one you consider to be optimal and compare its settings with the meter
readings.
If you find that you prefer exposures taken with settings that differ from those supplied by the meter, then these
settings can be programmed, as a correction, into your Digipro F. With your correction, the Digipro F will give precise
readings to produce optimal exposure results.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Digipro F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Digipro F in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Digipro F

Gossen Digipro F User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info