571659
9
Zoom out
Zoom in
Previous page
1/10
Next page
GOSSEN Foto- und Lichtmesstechnik GmbH 9
CINE scale (frames per second)
Select t with the function buttons – increasing
the shutter speed setting beyond 1/8000 and
preset the CINE speeds with the value buttons
Measure by pressing the M button
The measured aperture appears in the
left-hand digital display
Multiple flash
When the light output from a single flash is not
sufficent for you to work at the aperture desired, the
Digipro F is able to automatically calculate the
necessary number of flashes:
(desired aperture e.g.: F4 = 4 flashes)
Press value button t
Battery
1,5 V Mignon Typ AA (alkali-manganese)
Attention to warning BAT – change battery
Digipro F
Brief Instructions
Socket to connect
the synchronising
cable
Measuring button M
Buttons to adjust the
values
Display
Buttons to select
the required
function
Ambient light measurement
Shutter priority mode
Select t with function buttons and set desired
shutter speed with value buttons
Measure by pressing the M button
The measured aperture appears
Contrast measurement
Select t with the function buttons
Keep the M button depressed while aiming the
meter at various areas of the subject
After the measuring button is released, the
entire measured contrast range is displayed on
the analog aperture scale
Aperture priority mode
Select f with the function buttons and set the
desired aperture with the value buttons
Measure by pressing the M button
The measured shutter speed appears in the
right-hand digital display
Exposure value
Select EV with the function buttons
Measure by pressing the M button
The measured exposure value appears in the
left-hand digital display
Setting the film speed
Select ISO with the function buttons and set the
required ISO value with the value buttons
Measuring function
Flash readings
Readings can be taken with or without
synchronising cable
Select with the function buttons
Adjust the desired synchronising speed with
the value buttons
(1 s to 1/1000 s; including 1/90)
Press the measuring button M and trigger the
flash
The measured aperture stop appears in the left
digital display and as a flashing mark on the
analog aperture scale. The aperture stop for
the level of ambient light is additionally
indicated on the analog aperture scale
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Digipro F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Digipro F in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Digipro F

Gossen Digipro F User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info