539962
59
Zoom out
Zoom in
Previous page
1/72
Next page
59
GB
3. Turn blade xing screw (4) clockwise
to retighten blade (2).
Where saw chain (1) has been newly
tensioned, readjust the chain tension
after a short period in operation.
Check the chain tension before
each use of the electric pruner.
Chain lubrication
Always switch off the device
and allow the motor to cool
before lling with chain oil.
There is a risk of re if chain
oil overows.
Blade ( 2) and saw chain ( 1)
must always be oiled. Non-obser-
vance of this will result in increased
wear on the blade and saw chain.
A full tank will last for approx.
10minutes of continuous operation.
Check the oil level in good time.
The electric pruner is equipped with an oil
automatic system. As soon as the motor is
speeded up, the oil also ows faster to the
chain bar (
2). Before starting work,
check the oil level in the oil automation sys-
tem (see “Operation startup”).
Filling up with chain oil:
Check the oil ll level in the oil level
inspection window (27) and regularly
top up with chain oil.
Use Grizzly bio-oil; this product con-
tains additives that reduce wear and
tear and does not damage the pump
system. bio-oil is available from our
Service-Center (see P. 67 for the ad-
dress).
If you have no Grizzly bio-oil availa-
ble, use chain lubrication oil with low
adhesive additive content.
1. Unscrew the oil ll cap (28) and ll up
with chain oil.
2. Wipe off any spilled chain oil and
close the cap again.
Note that the saw can re-oil.
Operation startup
Observe the country-specic and
municipal regulations.
Do not work with the electric pruner
during general ordinary or pre-
scribed quiet periods.
Before starting, check
Check the tension of saw chain
(
1).
Check the chain oil level.
Check all nuts and screws are sitting
rmly.
Only remove blade cover (
18) at
the last minute.
Set the working length of the telescopic
arm before switching on the equip-
ment.
Check the shoulder belt (
14) for
comfortable positioning which facili-
tates holding the device.
Ensure that you are wearing protective
clothing.
Check that you are standing safely.
Check your working surroundings.
59


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fhe-710-a1

Reset search

  • The chain on this device continues to slip off the drive sprocket is there a fix for this particular problem Submitted on 16-3-2017 at 10:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHE 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHE 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info