539962
60
Zoom out
Zoom in
Previous page
1/72
Next page
60
GB
Switching On and Off
1. Put on the shoulder belt (
14) (see Attaching/Setting the
Shoulder Belt”).
2. Connect the power cable (12)
with the extension cable.
3. Make a loop in the end of the
extension cable and suspend this
in the cable strain relief element
(11) on the handle (9).
4. Connect the equipment to a pow-
er supply with the supply voltage
specied on the rating plate.
5. Hold the equipment rmly in a
relaxed and safe manner (see
).
6. Operate starting lock (13) and
switch on the pruning saw at
on/off switch (10).
For safety reasons, a lockable
continuous operation setting is
not possible.
7. The equipment will switch off
again when you release on/off
switch (10).
Checking the oil automation
Before starting work, check the oil level in
the oil automation system
1. Switch the device on and hold it above
clear ground. The device should not
touch the ground.
2. If a trace of oil appears, the device is
working awlessly.
3. If no trace of oil appears, clean the oil
outlet channel (
22) or have the de-
vice repaired by our customer service
department.
4. To clean, wipe the residues from the oil
outlet channel (
22) using a brush
or a rag.
Adjusting the Telescopic
Handle
The telescopic handle can be innitely ad-
justed using quick release (17).
1. Push the lever (17a) forward
as shown in the illustration then
push and pull to adjust the han-
dle length.
2. Pull back the lever (17a) and so
x the desired working length of
the telescopic handle.
3. If the lever (17a) comes loose,
tighten the Allen screw (17b)
using the Allen key (20).
Adjusting the handle
The incline angle of the handle (9) can be
adjusted continuously.
1. Loosen pivotal centre (8) and
and xing the adjustable handle
(9) on position.
2. Replace the pivotal centre (8) to
xation.
Transport
Put on blade cover ( 18).
Ensure that you do not switch on the
equipment when carrying it.
60


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fhe-710-a1

Reset search

  • The chain on this device continues to slip off the drive sprocket is there a fix for this particular problem Submitted on 16-3-2017 at 10:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHE 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHE 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info