Manual Florabest FHE 710 A1 (page 58 of 72) (English, German, Dutch)

539962

Zoom out

Zoom in

1/72

Attaching/setting the

shoulder Strap

1. Attach the carabiner hook of the

shoulder belt (14) to the carrying

eye (15) on the telescoping rod

of the device.

2. Set the belt length in a way that

the carrying eye (15) is at hip

height (see small picture).

3. You can also adjust the height of

the carrying eye (15) on the tel-

escoping rod after loosening the

hex socket head screw (15a).

Installing the sawing chain

and blade

Always disconnect the plug from

the mains socket before working.

Danger of electric shock.

1. Spread out the sawing chain (1)

in a loop in a way that the an-

gled cutting edges of the chain

links are aligned clockwise.

2. Place the sawing chain (1) into

the blade groove.

3. To install, hold the blade (2)

tilted at an angle of approx.

45degrees upward, and guide

the sawing chain (1) around the

chain wheel (23).

4. Place the blade (2) with the

longitudinal milling above the

centre blade guide (21).

5. To facilitate assembly, position

the chain tensioning pin (26) by

turning the chain tensioner (5)

towards the blade xing screw

(4) until it stops, before tting the

chain wheel cover (6).

6. Replace chain wheel cover (6).

-- Hole (25) on the blade is the

holder for chain tensioning

pin (26).

- Thread (24) is the holder for

blade xing screw (4).

7. Tighten the blade attachment

screw (4) with light hand force

only because the sawing chain

(1) must still be tightened.

Ensure that chain tensioning pin

(26) is positioned in hole (25) on

the blade (2). The pin must be com-

pletely inserted into the hole.

Tensioning the saw chain

Always disconnect the plug from

the mains socket before working.

Danger of electric shock.

The tension of saw chain (1) is important

both for your safety and for the function of

the electric pruner. A correctly tensioned

saw chain will increase the lifetime of your

equipment.

• Saw chain (1) is correctly tensioned

if it can be pulled around blade 2 by

hand (wearing gloves) without sag-

ging.

• When the saw chain is tensioned with

9 N (approx. 1 kg), the gap between

the saw chain and the guide rail may

not be more than 2 mm.

1. Turn blade xing screw (4) anticlock-

wise to slightly loosen blade (2).

2. Set the tension of saw chain 1 using

chain tensioner (5).

- Turn the chain tensioner clockwise to

increase the tension.

- Turn the chain tensioner anticlock-

wise to decrease the tension.

The chain on this device continues to slip off the drive sprocket is there a fix for this particular problem Submitted on 16-3-2017 at 10:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHE 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FHE 710 A1 Manual

Product: