539962
57
Zoom out
Zoom in
Previous page
1/72
Next page
57
GB
sembled.
The electric pruner is designed for
two-handed operation. Never work
with one hand or above shoulder
height.
Ensure you have a secure stance dur-
ing sawing. Do not work on a ladder,
in the tree or on unstable locations. Be
very cautious carrying out work on a
slope.
Basically the mains cable is dragged
behind the operator. The cable must
always lead away from the electric
pruner towards the rear.
Keep your working area tidy. Only
start work if your working area is free
from obstruction and you have planned
a safe path of escape when felling tim-
ber.
Place the claw stop securely with every
cut and do not begin with the sawing
before this.
Be extremely careful during sawing
small bushes and branches. The thin
branch thicket can snag in the saw
and whip in your direction or make
you unbalanced.
Do not cut wood that is lying on the
ground.
Pay attention to a possible spring-back
during the sawing of a branch which
is under stress, if the stress force of the
wood is suddenly released. Danger of
injury exists.
Check the safety status of the electric
pruner, in particular the chain bar,
chain brake and the chain, before use.
In the event that the cutting attach-
ment becomes jammed or stuck in the
branches, do not attempt to free the
equipment with the use of force. Switch
off the equipment immediately and re-
start it only after clearing the blockage.
There is a risk of injury!
Fitting
Pull out the power plug before doing
any work on the electric pruner itself
-– injury hazard!
Alwayas wear cut-protection gloves
Undertake only work with which you
are condent.
In case of uncertainty, contact a spe-
cialist or contact our service directly.
Before using the electric pruner, you
must:
- assebling the round handle
- attaching and setting the shoulder strap
- tting the blade
- tting the saw chain
- tensioning the saw chain
- ll up with chain oil
Assembling the Round
Handle
The Allen key can be found in its
holder on the quick release (
17).
1. Detach the round handle (16)
and counter bracket (7), which
are screwed together on deliv-
ery.
2. Set round handle (16) to the de-
sired position on the telescopic
handle.
3. Place brake arm (7) on the tele-
scopic handle.
4. Screw together round handle
(16) and brake arm (7).
5. The height or holding angle of
round handle (16) can be adjust-
ed at any time by slightly loosen-
ing the screws, pushing/turning,
and retightening the screws.
57


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fhe-710-a1

Reset search

  • The chain on this device continues to slip off the drive sprocket is there a fix for this particular problem Submitted on 16-3-2017 at 10:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHE 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHE 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info