624831

Casio 5325 Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
Operation Guide 5325
E-40
Digital Compass Precautions
Magnetic North and True North
The northerly direction can be expressed either as magnetic north or true
north, which are different from each other. Also, it is important to keep in
mind that magnetic north moves over time.
Magnetic north is the north that is indicated by the needle of a compass.
True north, which is the location of the North Pole of the Earth’s axis, is
the north that is normally indicated on maps.
The difference between magnetic north and true north is called the
“declination”. The closer you get to the North Pole, the greater the
declination angle.
True north
Earth
Magnetic north
E-41
Location
Taking a direction reading when you are near a source of strong magnetism can cause large errors
in readings. Because of this, you should avoid taking direction readings while in the vicinity of the
following types of objects: permanent magnets (magnetic necklaces, etc.), concentrations of metal
(metal doors, lockers, etc.), high tension wires, aerial wires, household appliances (TVs, personal
computers, washing machines, freezers, etc.).
Accurate direction readings are impossible while in a train, boat, air plane, etc.
Accurate readings are also impossible indoors, especially inside ferroconcrete structures. This is
because the metal framework of such structures picks up magnetism from appliances, etc.
Storage
The precision of the bearing sensor may deteriorate if the watch becomes magnetized. Because
of this, you should store the watch away from magnets or any other sources of strong magnetism,
including: permanent magnets (magnetic necklaces, etc.) and household appliances (TVs, personal
computers, washing machines, freezers, etc.).
Whenever you suspect that the watch may have become magnetized, perform the procedure under
“To perform bidirectional calibration” (page E-37).
E-42
Checking the Current Time in a Different Time Zone
You can use World Time to view the current time in one of 29 time zones around the globe. The currently
selected city is called the “World Time City”.
Hands and Indicators
z Hour Hand: Indicates the hour of the current time in the World Time City.
x Second Hand: Indicates the current World Time City for about three
seconds after the World Time mode is entered.
c Minute Hand
b Lower Dial Hand: Points to WT.
n Day Indicator
Pressing A causes the x
Second Hand to move to the current World Time
City for about three seconds.
Important!
Time calibration signal reception is disabled while the watch is in the World
Time Mode.

+
6*B
@
NYC (NEW YORK)
E-43
To view the time in another time zone
1. In the Timekeeping Mode, press C once to enter the World Time Mode.
The b
Lower Dial Hand will move to WT.
To select the UTC zone as your World Time, simply hold down B for about three seconds. No other
operation is required.
2. Pull out the crown.
The x
Second Hand points to the currently selected World Time city code.
The b
Lower Dial Hand will indicate AUTO, STD (standard time) or DST (daylight saving time),
which indicates the current daylight saving time setting.
If you do not perform any operation with the crown for about two minutes after pulling it out, crown
operations will become disabled and the watch hands will no longer move when you rotate the
crown. If this happens, push the crown back in and then pull it out again.
3. Rotate the crown to move the x
Second Hand to the city code you want to select as the World Time
City.
Each time you select a city code, the z
Hour Hand, c Minute Hand, and n Day Indicator move to
the current time and day for that city code. For details about city codes, see the “City Code Table” at
the back of this manual.
If you think that the time indicated for the selected World Time City is not correct, it probably means
that there is something wrong with your Home City settings. Use the procedure under “To confi gure
Home City settings” (page E-25) to correct the Home City settings.
E-44
4. Hold down A for about one second to cycle through the summer time settings as shown below.
A A
AUTO STD DST
A
5. After selecting the city you want, push the crown back in to return to the World Time Mode.
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This capability can come
in handy when you frequently travel between two locations in different time zones.
The following example shows what happens when the Home City and World
Time City are swapped while the Home City originally is TYO (Tokyo) and the
World Time City is NYC (New York).
Home City World Time City
Before swapping
Tokyo
10:08 p.m.
(Standard time)
New York
9:08 a.m.
(Daylight saving time)
After swapping
New York
9:08 a.m.
(Daylight saving time)
Tokyo
10:08 p.m.
(Standard time)

@
E-45
To swap your Home City and World Time City
1. In the World Time Mode, pull out the crown.
2. Rotate the crown to move the x
Second Hand to the city you want to select
as your World Time City.
In this example, you would move the x
Second Hand to NYC in order to
select New York as the World Time City.
Wait until the z
Hour Hand and c Minute Hand complete their move to
the time in the currently selected World Time City. You will not be able to
perform step 4 of this procedure until the hands stop moving.
3. Push the crown back in.
4. Hold down A for about three seconds until the watch beeps.
This will make the World Time City (NYC in this example) your new Home
City. At the same time, it will change the Home City you had selected prior
to step 4 (TYO in this example), to your World Time City.
After swapping the Home City and World Time City, the watch will stay in
the World Time Mode. The x
Second Hand will point to your new World
Time City (TYO in this example).
Note
If your current World Time City supports time calibration signal reception, making it your Home City
enables calibration signal reception for that city.

@
+B
E-46
Using the Stopwatch
You can use the Stopwatch Mode to measure elapsed time and lap times, and to recall lap times. Up to
10 lap times can be stored in memory. There is also memory to record the fastest lap time. Though no
more lap times are stored after 10 times are in memory, the fastest lap time continues to be updated as
required. Starting a new elapsed time operation clears all of the memories (including fastest lap time).
What is a lap time?
A lap time is the time elapsed over a specifi c segment of a race.
Example: Car race on an oval track
Start
Lap 1
Lap 2
Lap 3
E-47
Hands and Indicators
z Hour Hand: Indicates the stopwatch minute count
(1 revolution = 60 minutes).
x Second Hand: Indicates the 1/20 (0.05)-second count during stopwatch
operation.
c Minute Hand: Indicates the stopwatch seconds count.
b Lower Dial Hand: Indicates the current lap.
To enter and exit the Stopwatch Mode
In the Timekeeping Mode, press C twice to enter the Stopwatch Mode.
The b
Lower Dial Hand will move to 1 (Lap 1).
To perform an elapsed time operation
A
A A A B
Start Stop (Restart) (Stop) Reset
To perform lap time measurement
A
B B
. . . . . .
A B
Start Lap (LAP1) Lap (LAP2) Stop Reset
Each press of B records a lap time. You can record up to 10 lap times. After that, you can still perform
lap time operations, but they will not be recorded.

@B+
*
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5325 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5325

Casio 5325 User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info