Manual Casio 5325 (page 4 of 9) (English)

624831

Zoom out

Zoom in

1/9

Operation Guide 5325

E-30

To change the current day setting manually

1. Pull out the crown.

 This will cause the x

Second Hand to move to the city code of

the currently selected Home City.

2. Hold down C for about one second until the watch beeps and the

Second Hand moves to 12 o’clock.

 This indicates the manual time setting mode.

3. Press C twice. This will enter the day setting mode.

 The n

Day Indicator will move slightly to indicate the setting

mode.

4. Rotate the crown to adjust the day setting.

5. After the n

Day Indicator stops moving, press C. This will enter

the month setting mode.

 The x

Second Hand will move to the currently selected month.

6. Rotate the crown to adjust the month setting.

7. Press C. This will enter the year setting mode.

 The z

Hour Hand will move to the number that represents the

tens digit of the year and the c

Minute Hand will move to the

number that represents the ones digit. The x

Second Hand will

move to 12 o’clock and stop there.



Dec

Nov

Feb

Mar

Apr

Oct

Sep

Aug

Jan

Jul May

Jun

Setting the month

E-25

Conﬁ guring Home City Settings

The Home City is location where you will normally use the watch. You can choose from a selection of city

codes that represent 29 cities around the globe.

To conﬁ gure Home City settings

Note

 This watch does not have a city code that corresponds to Newfoundland.

1. Pull out the crown.

 This will cause the x

Second Hand to move to the city code of the

currently selected Home City.

 This indicates the city code setting mode.

 If you do not perform any operation with the crown for about two

minutes after pulling it out, crown operations will become disabled and

the hand will not move if you rotate the crown. If this happens, push the

crown back in and then pull it out again.

 For details about city codes, see the “City Code Table” at the back of

this manual.

2. Rotate the crown to move the x

Second Hand to the city code you want to

select as your Home City.

 Each time you select a city code, the z

Hour Hand, c Minute Hand

and n

Day Indicator move to the current time and day for that city

code.

3. Push the crown back in to return to the Timekeeping Mode.



TYO (TOKYO)



E-24

Timekeeping

To enter the Timekeeping Mode, hold down C at least two seconds.

Hand Functions

z Hour Hand

x Second Hand

c Minute Hand

v Upper Dial Hand: Indicates the current hour in the Home City time in

24-hour format.

b Lower Dial Hand: Points to the day of the week.

n Day Indicator



@>B

E-26

STD/DST Switching

You can select summer time or standard time independently for each city. The initial default setting for all

cities is AUTO.

Normally you should use the AUTO setting because it automatically switches between summer time

and standard time. You should change the setting to STD (standard time) or DST (summer time) in the

following cases.

− When using a time of a location that is not included in the watch’s list of 29 cities

− When the preset AUTO standard time/summer time timing is incorrect for some reason

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time.

Remember that not all countries or even local areas use Daylight Saving Time.

 Note that you cannot switch between STD (standard time) and DST (daylight saving time) while UTC*

is selected as your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping. The reference point for

UTC is Greenwich, England.

E-27

To switch between standard time and summer time manually

1. Perform steps 1 and 2 under “To conﬁ gure Home City settings” (page E-25).

 Selecting a city code will cause the z

Hour Hand, c Minute Hand, and v Upper Dial Hand to

move automatically to the current time for the selected city code.

 If you will use the watch in a city that is not included in the city code list, select a city code that is in

the same time zone as your city.

 Displaying the Home City Settings screen will cause the b

Lower Dial Hand to move to AUTO (auto

switching), STD (standard time), or DST (daylight saving time).

AUTO

The watch automatically switches between standard time and daylight saving time in accordance

with its calendar.

STD The watch always shows standard time.

DST The watch always shows daylight saving time.

2. Hold down A for about one second to cycle through the summer time settings

as shown below.

A A

AUTO STD DST

3. After the setting is way you want, push the crown back in.

E-28

Conﬁ guring Current Time and Day Settings Manually

You can conﬁ gure current time and day settings manually when the watch is unable to receive a time

calibration signal.

To change the current time setting manually

1. Pull out the crown.

 This will cause the x

Second Hand to move to the city code of the

currently selected Home City.

 If you do not perform any operation with the crown for about two

minutes after pulling it out, crown operations will become disabled and

the hand will not move if you rotate the crown. If this happens, push the

crown back in and then pull it out again.

2. Change the Home City settings, if you want.

 For details about these settings, see step 2 under “To conﬁ gure Home

City settings” (page E-25).

3. Hold down C for about one second until the watch beeps and the

Second Hand moves to 12 o’clock.

 This indicates the manual time setting mode.

 In the following steps, each press of C cycles between settings as

shown below.



TYO (TOKYO)



+@>B

E-29

Home city/DST

Hour/Minute Hour

Year DayMonth

C C

4. Rotate the crown to adjust the time (hour and minute) setting.

 See “Using the Crown” (page E-3) for information about high-speed hand movement.

 The v

Upper Dial Hand is synchronized with the z Hour Hand.

 When adjusting the setting, check to make sure that the v

Upper Dial Hand correctly indicates an

a.m. time or p.m. time.

 If you want to change the day setting at this time, press C and perform the procedure starting from

step 3 under “To change the current day setting manually” (page E-30).

5. After the settings are the way you want, push the crown back in to return to the Timekeeping Mode.

 This causes timekeeping to resume with the x

Second Hand starting from 12 o’clock.

E-31

8. Rotate the crown to adjust the year setting.

 If you want to change the time setting at this time, press C and then perform the procedure starting

from step 4 under “To change the current time setting manually” (page E-28).

Year setting (ones digit)

Year setting (tens digit)

5070

9. After the settings are the way you want, push the crown back in to return to the Timekeeping Mode.

 This causes timekeeping to resume with the x Second Hand starting from 12 o’clock.

Note

 The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the day, there should be no reason to change it except after you have the watch’s

rechargeable battery replaced or after power drops to Level 3.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5325 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5325

Casio 5325 User Manual - German - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 5325 Manual

Product: